3mm 1050 H24 Aluminium Sheet

Panimula

In today’s market, choosing the right aluminum sheet for your project hinges on a balance of properties, cost, pagiging formable, and reliability. For engineers, Mga Taga-disenyo, and procurement professionals, the combination of high formability, mahusay na paglaban sa kaagnasan, and robust but lightweight performance makes the 3mm 1050 h24 aluminium sheet a compelling option for a wide range of applications.

This article explores what “3mm 1050 h24 aluminium sheet” means, why this temper and thickness are often chosen, and how to evaluate it against alternative alloys and temper options. We’ll also introduce Huawei Aluminum as a supplier partner for those seeking a reliable, scalable source of this material.

Sa madaling salita, 3mm 1050 h24 aluminium sheet is a widely used option when you need a near-pure aluminum sheet with good ductility, excellent surface finish potential, and predictable performance across many environmental conditions.

By the end of this guide, you’ll understand its material science fundamentals, practical fabrication considerations, and how to source it effectively for manufacturing, konstruksiyon, or design projects.

3mm 1050 H24 Aluminium Sheet

About 3mm 1050 h24 aluminium sheet

What is 1050-H24 aluminum alloy?

1050 aluminyo is part of the 1xxx series, the highest-purity aluminum available commercially. It typically contains not less than 99.5% aluminyo, with trace elements kept to a minimum.

Ang 1050 alloy is prized for its superb ductility, exceptional corrosion resistance, at kadalian ng paggawa. The temper designation “H24” indicates a work-hardened state that has been partially annealed to achieve a balanced combination of strength and formability.

Sa praktikal na mga termino, 1050-H24 offers more yield strength and hardness than fully annealed 1050 (O or F), while still maintaining excellent formability for bending, pag stamp ng, and shallow drawing.

Key takeaways:
– Material family: 1xxx serye ng mga (mataas na kadalisayan aluminyo)
– Typical composition: ~99.5% Al, residual elements in trace amounts
– Temper: H24 (strain-hardened and partially annealed)
– Thickness focus: 3 mm (0.118 pulgada) is a common industrial thickness for exterior, interior, and structural applications requiring a sturdy yet light sheet

Why the temper designation matters

The H-series temper designations reflect how much work hardening has been applied. H24 sits between fully annealed (O) and heavily work-hardened (H), offering:
– Reasonable yield strength and tensile strength
– Good elongation, allowing for bending radii and forming without cracking
– Strong surface finish potential and excellent corrosion resistance
– Superior weldability relative to some higher-strength aluminum alloys

For design teams, this translates into a material that is predictable to form into panels, enclosures, housings, and decorative elements without sacrificing mechanical integrity.

Typical chemical composition and what it means for corrosion and formability

While exact compositions can vary by supplier and production batch, a typical 1050 alloy composition looks like:
– Aluminum (Al): ~99.5% min
– Silicon, bakal na bakal, tanso, mangganeso, magnesiyo: trace or very low quantities
– Other elements: controlled to meet purity and performance standards

Because of this high aluminum content and low impurity level, 1050-H24 demonstrates excellent corrosion resistance in atmospheric and most mildly corrosive environments.

It forms protective oxide layers readily, which helps resist degradation in outdoor and indoor settings. The trade-off is that strength remains lower than many other alloys (especially those in the 2xxx, 6xxx, and 7xxx families), but the material’s ductility and surface compatibility often outweigh this for applications like enclosures, mga reflector, heat exchangers with thin walls, and decorative panels.

3mm Aluminium Sheet Thickness Measurement

Material properties and data

Understanding the mechanical, pisikal, and thermal properties of 3mm 1050 h24 aluminium sheet helps you forecast performance in real-world scenarios.

The following properties are representative and should be treated as typical ranges that vary by supplier, processing, at pagtatapos.

Mga katangian ng makina (typical ranges for 1050-H24)

• Magbunga ng lakas (0.2% offset): roughly 40–60 MPa
• Ultimate lakas ng makunat (Rm): roughly 90–125 MPa
• Pagpapahaba sa break (A80/A50): 12–25% depending on thickness and forming
• Ang katigasan ng ulo (HB or Vickers, varies by scale): commonly in the 40–60 HB range for H24 temper

Notes:
– Values vary with processing history and exact heat treatment. Your supplier’s data sheet is the best source for exact numbers for a given batch.
– The 3 mm aluminyo sheet often yields slight improvements in overall stiffness per unit weight compared to very thin gauges, but it remains well below the strength of high-strength 2xxx or 7xxx alloys.

Mga katangiang pisikal

• Densidad ng katawan: ~2.70–2.71 g/cm3
• Punto ng pagtunaw: ~660°C (1620°F) para sa purong aluminyo
• Tiyak na kapasidad ng init: ~0.9 J/g·K (approximate; depends on purity and heat treatment)

Thermal properties

• Thermal kondaktibiti: ~205 W/(m·K) sa temperatura ng kuwarto
• Koepisyent ng thermal expansion (CTE): ~23.1×10^-6 /°C (typical for Al alloys)

These thermal properties make 1050-H24 suitable for applications where thermal conduction matters, such as heat transfer components, mga radiator, and certain high-emissivity exterior panels, while its high reflectivity can be advantageous for lighting fixtures and decorative panels.

Formability, kakayahang machining, and surface finish

• Bending and forming: Napakahusay na ductility, good for channels, enclosures, and panels with moderate bend radii
• Pagputol: Easy to machine with standard metalworking tools; chips are fine and curling tends to be manageable
• Welding: Reasonable weldability for aluminum alloys; careful control of heat input minimizes distortion and potential loss of temper
• Surface finishing: Good for mechanical finishing, pag anod ng, and coating. The H24 temper doesn’t prevent anodizing; it may yield a uniform surface color after finishing

Construction Used 3mm 1050 H24 Aluminium Sheet

Applications and use cases

3mm 1050 h24 aluminium sheet sits at the intersection of formability and functional performance. Below are representative domains where this material is commonly used.

Packaging and consumer electronics enclosures

• Lightweight protective housings for consumer devices
• Heat sinks with shallow profiles
• Shielding panels or contact surfaces in consumer electronics with moderate enclosure requirements

Architecture and construction

• Exterior wall cladding and decorative panels in low to moderate exposure environments
• Interior wall panels, ceiling tiles, and decorative features
• Roofing components with limited weather exposure

Automotive, aerospace, and transport: where applicable

• Non-structural panels, Mga kalasag ng init, and interior components where weight savings matter
• Decorative trim, interior panels, and dashboard elements where high purity aluminum is desired

Mga heat exchanger, chemical processing, and corrosion-prone environments

• Thin-walled components in mildly corrosive environments where high purity aluminum offers corrosion resistance
• Chemical equipment panels where a near-pure aluminum surface is desired

Manufacturing and processing considerations

To maximize the performance of 3mm 1050 h24 aluminium sheet, you need to align manufacturing steps with its temper, kapal naman, and intended use.

The following subsections cover practical guidance for fabricators and engineers.

Forming and fabrication best practices

• Bending radii: Para sa 3 mm thick sheet, aim for minimum bend radii in the range of 3–4 times the sheet thickness (i.e., 9–12 mm) for clean bends without cracking in H24
• Email Address *: Use sharp, properly tuned tools; keep exit sheets and dies clean to prevent galling and tearing
• Annealing considerations: H24 is partially annealed to maintain formability. Avoid over-work-hardening by controlling forming speed and tooling temperature
• Surface handling: If bending leaves scratches, apply gentle deburring and consider maskings to protect finishes during assembly

Welding and joining guidelines

• Welding processes: MIG (GMAW) or TIG (GTAW) are suitable for 1050-H24; keep heat input moderate to minimize distortion and maintain temper
• Pre-weld treatment: Clean surfaces to remove oxides and oils; ensure oxide layers are removed at weld zones for good fusion
• Post-weld finishing: Light mechanical smoothing if needed to preserve surface finish and avoid ductility loss near weld seams

Surface finishing and anodizing

• Pagpapahid ng langis: 1050 alloys anodize well due to high aluminum content; evenly porous oxide layers form under controlled electrolyte conditions
• Surface options: Nagsipilyo, mirror-polished, satin, or textured finishes can be applied depending on aesthetic and functional needs
• Mga Coatings: Primers, mga pintura, or powder coatings adhere well with proper pretreatment; surface cleanliness is crucial for coating durability

Machining and cutting

• Cutting methods: Shearing, pagputol ng laser, plasma cutting, and waterjet cut are all common; laser and waterjet are preferred for precise, Mga gilid na walang burr
• Drill and hole operations: Use sharp drill bits and slow feed rates to prevent work-hardening at the edge and distortion
• Tolerance considerations: Expect tolerances around ±0.15–0.30 mm depending on equipment and finishing; consult supplier specs for exact tolerances on 3 mm stock

Thermal and environmental considerations

• Temperature stability: Aluminum’s aluminum-oxide layer provides robust corrosion resistance, but in very aggressive environments (industrial chemicals, spray ng asin, extreme temperatures) consider protective coatings or alloys with improved corrosion resistance
• Thermal expansion: Expect noticeable dimensional changes with temperature; ensure design accounts for contraction/expansion

Huawei Aluminium Sheet Export Packaging

Comparisons and benchmarking

To help you assess where 3mm 1050 h24 aluminium sheet fits within a broader design and procurement strategy, here is a comparison table with several common alternatives.

The table uses approximate typical values and should be verified against supplier data sheets for precise projects.

Material property comparison

Notes:
– The values for these alloys and tempers vary by producer, processing, and exact heat treatments. Always rely on the latest supplier datasheets for precise numbers.
– 1050-H24 is typically favored for applications requiring a balance of formability and surface finish rather than high strength.

Cost and availability indicators

Kontrol sa kalidad, testing, and standards

Quality control is essential when fabricating with 3mm 1050-H24 aluminum sheets. The following are common quality assurance practices and standards used in the industry.

Thickness tolerance and flatness

• Kapal ng tolerance: Typically ±0.15 to ±0.30 mm for precision rolling; check with the supplier for exact tolerances based on width and process
• Flatness: Requires proper inventory handling and storage; plan for potential minor bowing in long sheets and consider straightening if necessary
• Surface quality: Expect uniform surface finish; consistent surface texture is important for post-processing and coating adhesion

Mechanical testing

• Hardness checks: Brinell or Vickers hardness testing to confirm temper consistency
• Tensile testing: Samples cut to standard dimensions and tested to verify yield, lakas ng paghatak, at pagpapahaba
• Hardness and ductility balance: Higher hardness in H24 temper should align with the expected level of forming capability

Corrosion testing

• Salt spray tests and neutral salt spray (NSS) tests are typical for evaluating corrosion resistance in outdoor environments
• Tests should be performed under expected exposure conditions and verified with the CoA

Surface finishing and coating compatibility checks

• Anodizing tests: Ensure uniform oxide layer formation and color uniformity
• Paint or powder coating adhesion tests: Evaluate primer adhesion and coating integrity under service conditions

Mga FAQ

What is the main benefit of choosing 3mm 1050-H24 aluminum sheet?

It offers a balanced combination of formability, paglaban sa kaagnasan, and surface finish potential, with better strength than fully annealed 1xxx alloys and superior workability for bending and forming.

Is 1050-H24 suitable for welding?

Oo nga, 1050-H24 welds well with standard aluminum welding techniques such as TIG and MIG. Heat input should be controlled to minimize distortion and loss of temper.

How does 1050-H24 compare to other 1xxx alloys in corrosion resistance?

1xxx alloys generally offer excellent corrosion resistance due to their high aluminum content. 1050-H24 maintains this property while adding moderate strength through strain hardening.

Can 3mm 1050-H24 be anodized?

Oo nga. Anodizing is common for 1xxx series alloys, kasama na ang 1050. The high purity of aluminum in this alloy makes anodizing straightforward, producing uniform oxide layers.

What should I verify when ordering from Huawei Aluminum?

Ensure the CoA and test certificates match your project specifications, verify the temper stability (H24) for the target thickness, confirm available widths, and discuss surface finishing options (hal., nagsipilyo, salamin, anodized).

Are there environmental or supply-chain considerations?

Confirm supplier certifications, supply reliability, and the ability to meet regional compliance or sustainability requirements. Request batch-level traceability to minimize supply risks.

Supplier spotlight: Huawei Aluminum in context

Huawei Aluminum is positioned as a major supplier in the global aluminum sheet market, with a broad product range and a capability footprint that supports consistent deliveries of standard and customized stock.

In a market where supply chain resilience and product traceability have become critical, Huawei’s scale helps ensure steady availability of 3mm 1050-H24 sheets for projects with tight timelines. Their offerings typically include:
– Aiming for stable purity and temper control across shipments
– Documentation for compliance and quality assurance
– A mix of thicknesses and widths to support varied fabrication needs

For buyers, this means potential advantages in lead times and consistency, provided you align with their minimum order quantities and logistics capabilities. If you’re evaluating suppliers for long-term partnerships, consider requesting:
– A sample set to validate formability, Pagtatapos ng Ibabaw, and coating compatibility
– Clarifications on thickness tolerances for your critical applications
– The ability to support a pilot order that can scale into a larger production run

Pangwakas na Salita

The 3mm 1050 h24 aluminium sheet is a versatile option for engineers and designers who need a near-pure aluminum sheet with a practical balance of formability and strength.

Its H24 temper provides a stable intermediate state between full soft and heavy work-hardening, enabling reliable bending, shaping, and joining while preserving corrosion resistance and a high-quality surface finish.

While it does not reach the strength levels of alloys such as 6061-T6 or 2024-T3, its advantages lie in ductility, easy fabrication, and favorable cost/performance dynamics for a broad range of non-structural and semi-structural applications.

For procurement and project leadership, the partnership with credible suppliers such as Huawei Aluminum can help ensure consistent supply, quality documentation, and support for customization needs, kasama na ang kapal, lapad ng katawan, and surface treatment.

As you translate these insights into your design and manufacturing plans, remember to align temper expectations, confirm finish options, and account for performance requirements across environmental conditions.

In closing, “3mm 1050 h24 aluminium sheet” embodies a practical, well-rounded option that resonates with many modern fabrication challenges—from rapid prototyping and light-weight automotive panels to decorative architectural elements and robust outdoor enclosures.

With careful material selection, supplier alignment, and precise fabrication practices, this alloy and temper can help you deliver reliable results, on time and within budget, while maintaining the highest standards of quality and safety.

Share with PDF: Download