3003 H22 Aluminum Diamond Plate

131 Mga Pananaw 2026-11-19 07:30:49

Parameter Specification
haluang metal 3003
Temper H22
Ang kapal 1.0–6.0 mm
Lapad ng katawan 1000–1500 mm
Mga Aplikasyon Truck Flooring, Trailer Floors, Stair Treads, Industrial Walkways
Whatsapp E-mail Makipag ugnay sa

Talaan Ng Mga Nilalaman SHOW

1. Panimula

3003 H22 aluminum diamond plate is a patterned aluminum product designed for applications that require a combination of lightweight construction, surface traction, paglaban sa kaagnasan, and practical fabrication performance.

It consists of 3003 aluminum-manganese alloy with a raised diamond tread pattern on one side.

Ang 3003 alloy offers better strength than commercially pure aluminum while retaining good formability and corrosion resistance.

Its H22 temper provides a partially annealed, strain-hardened condition, giving the material a balance of strength and workability for many general-purpose applications.

The raised diamond pattern helps improve grip underfoot and makes the plate suitable for floors, mga daanan ng mga daan, mga hakbang, mga rampa, truck components, and equipment platforms.

Its relatively low density also helps reduce structural weight compared with conventional steel tread plate.

For buyers and fabricators, selecting the right 3003 H22 aluminum diamond plate involves more than choosing an alloy and thickness.

Base-metal thickness, tread height, pattern design, sheet dimensions, kalidad ng ibabaw, and installation conditions all affect the finished product’s performance.

3003 H22 Aluminum Diamond Plate

3003 H22 Aluminum Diamond Plate

2. Ano ang 3003 H22 Aluminum Diamond Plate?

3003 H22 aluminum diamond plate is a non-heat-treatable aluminum tread plate made from 3003 aluminyo haluang metal.

It combines the mechanical characteristics of an aluminum-manganese alloy with a raised diamond pattern that provides additional surface texture.

Each part of its designation describes a different aspect of the product: 3003 identifies the alloy, H22 identifies the temper, and diamond plate describes the surface pattern.

2.1 Pag-unawa 3003 aluminyo haluang metal

3003 aluminyo belongs to the 3xxx series of aluminum alloys, in which manganese serves as the principal alloying element.

Compared with 1xxx series commercially pure aluminum, 3003 generally offers higher strength while maintaining good corrosion resistance and forming characteristics.

The alloy works well in common fabrication operations such as cutting, pagbaluktot, pagulong gulong, and forming.

It also offers good weldability when fabricators select suitable welding procedures and filler materials.

Ang mga katangiang ito ay gumagawa ng 3003 a practical material for general-purpose tread plate.

It is commonly selected for applications where moderate strength, low weight, paglaban sa kaagnasan, and ease of fabrication matter more than high structural strength.

2.2 What Does H22 Temper Mean?

The H22 designation describes the material’s mechanical condition after strain hardening and partial annealing.

  • H: The material has undergone strain hardening to increase its strength.
  • 2: The material has been partially annealed after strain hardening.
  • 2: The final digit indicates a quarter-hard temper.

This temper provides a balance between strength and formability. Compared with a softer O temper, H22 offers higher strength.

Compared with harder strain-hardened tempers, it generally allows easier forming.

2.3 Understanding the Diamond Tread Pattern

The diamond pattern consists of raised projections on the plate surface.

These raised areas create a textured contact surface that can improve traction compared with a smooth aluminum sheet.

The pattern also gives the plate a distinctive industrial appearance and can help conceal minor surface marks that occur during ordinary handling.

When specifying aluminum diamond tread plate, buyers should distinguish between two thickness measurements:

  • Base-metal thickness: The thickness of the aluminum sheet beneath the raised pattern.
  • Overall thickness: The measured thickness from the bottom surface to the top of the raised pattern.

This distinction is important because suppliers may quote plate thickness based on the base metal rather than the overall patterned thickness.

Buyers should confirm the measurement method before placing an order.

3. Mga pagtutukoy ng 3003 H22 Aluminum Diamond Plate

Ang mga pagtutukoy ng 3003 H22 aluminum diamond plate cover its alloy, Pamahiin, base-metal thickness, sheet dimensions, tread pattern, and surface finish.

These details determine the plate’s weight, fabrication behavior, appearance, and suitability for different applications.

Item Karaniwang Saklaw / Options
haluang metal 3003
Temper H22 (also O, H14, H24, H26 on request)
Pamantayan ASTM B209, EN 485 / EN 573, GB/T 3880
Base thickness about 1.0–6.0 mm [confirm]
Common thicknesses 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0 mm
Overall thickness Base thickness + pattern height
Lapad ng katawan about 1000–1500 mm (wider on request)
Haba about 2000–6000 mm, or coil
Common sheet sizes 1000 × 2000, 1220 × 2440, 1250 × 2500, 1500 × 3000 mm
Coil supply Width about 1000–1500 mm, core ID 305 / 405 / 508 mm [confirm]
Pattern type Diamante (two-bar), five-bar, three-bar, lentil, orange-peel
Pattern height about 0.5–1.5 mm, depending on thickness
Embossed side One side (mill-finish smooth back)
Surface finish Tapos na ang gilingan, anodized, pininturahan, film-coated
Protective film PE film or interleaving paper
Kapal ng tolerance Per standard, or as agreed
Lapad ng katawan / length tolerance Per standard, or as agreed
Flatness / camber Per standard, or as agreed
Edge condition Sheared, slit, or saw-cut
Custom cutting To drawing
Packaging Interleaving paper, film, wooden pallet or case, moisture protection
Certificates Mill test certificate (EN 10204 3.1)

4. Kemikal na komposisyon ng 3003 Aluminyo

Chemical composition is the first item to confirm on a mill test certificate. Para sa 3003, the manganese content is the defining feature.

4.1 Typical composition limits (bigat ng katawan %)

Elemento Limit
Aluminyo (Al) Natitira (about 96.8–99.0)
Mga mangganeso (Mn) 1.0–1.5
bakal na bakal (Fe) ≤ 0.70
Silicon (Si Si) ≤ 0.60
Tanso (Cu) 0.05–0.20
Sink (Zn) ≤ 0.10
Iba pang mga elemento, bawat isa ay ≤ 0.05
Iba pang mga elemento, kabuuan ≤ 0.15

Limits follow common international standards such as ASTM B209 and EN 573. Confirm against the standard stated in your contract.

Properties of 3003 H22 Aluminum Diamond Plate

Properties of 3003 H22 Aluminum Diamond Plate

5. Mechanical and Physical Properties of 3003 H22 Aluminum Diamond Plate

Mechanical and physical properties decide whether a plate performs well in real use.

Para sa 3003 H22, they come from two sources: the manganese in the alloy and the partial-anneal temper.

5.1 Mga katangian ng makina

Typical reference ranges for 3003 in common tempers (flat sheet basis):

Temper Lakas ng Paghatak (MPa) Yield Lakas (MPa) Pagpapahaba (%)
O 95-130 ≥ 35 ≥ 20-23
H22 120-160 ≥ 85 ≥ 8-12
H24 140-180 ≥ 115 ≥ 6-10
H14 145-185 ≥ 125 ≥ 5-8

Indicative only. Exact limits depend on thickness and the standard used (ASTM B209, EN 485-2, GB/T 3880). Always request the actual values on the mill test certificate.

How to read these properties

  • Lakas ng paghatak is the maximum stress before fracture.
  • Magbunga ng lakas is where permanent deformation begins. For flooring and treads, this matters more than tensile strength.
  • Pagpapahaba shows how far the plate can stretch. Higher elongation means better bending performance.

H22 sits between O and H24: firm enough to resist denting, yet ductile enough to bend cleanly.

5.2 Mga Katangian ng Pisikal

The physical properties of 3003 aluminum influence its weight, paglipat ng init, dimensional stability, and performance under changing temperatures.

Pisikal na Ari arian Typical Value Unit
Densidad ng katawan 2.73 g/cm³
Thermal kondaktibiti Humigit-kumulang. 190 W/(m·K)
Electrical kondaktibiti Humigit-kumulang. 40–42 % IACS
Tiyak na Kapasidad ng Init Humigit-kumulang. 900 J/(kg· K)
nababanat na modulus Humigit-kumulang. 69–70 GPa
Linear Thermal Expansion Humigit-kumulang. 23 ×10⁻⁶/K
Melting Range Humigit-kumulang. 643–655 °C

Values are approximate room-temperature references for 3003 aluminyo haluang metal.

Actual properties may vary with composition, Pamahiin, and testing conditions.

6. Key Advantages of 3003 H22 Aluminum Diamond Plate

3003 H22 aluminum diamond plate combines a lightweight structure, magandang paglaban sa kaagnasan, and practical formability with a raised tread pattern.

These characteristics make it suitable for various industrial, commercial, and transportation applications.

6.1 Improved Surface Traction

The raised diamond pattern provides a textured surface that improves grip compared with smooth aluminum sheet.

It is commonly used for walkways, mga hakbang, mga rampa, and vehicle floors. Actual slip resistance depends on surface conditions, pattern design, and maintenance.

6.2 Lightweight and Easy to Handle

With a density of approximately 2.73 g/cm³, 3003 aluminum is much lighter than steel.

Its low weight helps reduce the overall mass of vehicles, mga kagamitan, and flooring systems while making transportation and installation easier.

6.3 Good Corrosion Resistance

3003 aluminum naturally forms a protective oxide layer that helps resist oxidation in ordinary atmospheric environments.

This makes it suitable for many indoor and outdoor applications, although harsh chemicals and prolonged saltwater exposure require additional consideration.

6.4 Balanced Strength and Formability

The H22 temper provides a practical balance between strength and workability.

The plate can undergo common fabrication operations, including cutting, drilling, pagbaluktot, and welding with suitable procedures.

Its formability makes it useful for customized panels, mga hakbang, and equipment covers.

6.5 Convenient Fabrication and Installation

3003 H22 diamond plate supports common metalworking processes and can be supplied in customized dimensions.

Its lightweight structure also simplifies handling, fastening, and installation, helping improve fabrication efficiency.

6.6 Attractive Industrial Appearance

The raised diamond pattern creates a distinctive metallic finish that combines practical surface texture with a clean industrial appearance.

Bright and mill-finish options support different functional and decorative requirements.

Sa kabuuan, 3003 H22 aluminum diamond plate offers a practical combination of traction, low weight, paglaban sa kaagnasan, and fabrication flexibility for general-purpose applications.

3003 H22 Aluminum Diamond Plate for Industrial Flooring


3003 H22 Aluminum Diamond Plate for Industrial Flooring

7. Mga Karaniwang Aplikasyon ng 3003 H22 Aluminum Diamond Plate

3003 H22 aluminum diamond plate serves a wide range of industrial, transportasyon, commercial, and equipment applications.

Its lightweight construction, raised surface pattern, paglaban sa kaagnasan, and fabrication flexibility make it suitable for products that require a durable textured metal surface.

7.1 Industrial Flooring and Walkways

Industrial facilities use aluminum diamond plate for selected flooring and access areas where a textured metal surface is desirable.

Typical applications include:

  • Factory and workshop walkways
  • Equipment maintenance platforms
  • Warehouse access areas
  • Machine service floors
  • Protective floor panels

The raised diamond pattern provides additional surface texture, while aluminum’s low weight helps reduce the dead load of suitable structures.

For industrial flooring, designers should evaluate the plate thickness, support spacing, expected traffic, concentrated loads, and required slip-resistance performance.

7.2 Truck and Trailer Manufacturing

Transportation manufacturers use aluminum diamond plate in selected vehicle components because it combines low weight with a textured surface.

Common applications include:

  • Truck bed flooring
  • Trailer floors and access panels
  • Vehicle steps and running boards
  • Cargo-area protective panels
  • Toolboxes and storage compartments

Reducing vehicle component weight can help improve payload efficiency and simplify handling.

The raised surface also provides additional traction for operators accessing truck beds and service areas.

For heavy-duty vehicle applications, buyers should compare 3003 H22 with 5052 H32 and other suitable alloys according to load requirements, impact exposure, and forming needs.

Trailer Used 3003 H22 Aluminum Diamond Plate

Trailer Used 3003 H22 Aluminum Diamond Plate

7.3 Stairs, Steps, and Ramps

Aluminum diamond plate is commonly used to manufacture steps, tinatapakan ang hagdan, mga rampa, and landing panels.

Its textured surface provides additional grip for people moving between different working levels.

Its relatively low weight also makes it suitable for portable access equipment and lightweight platforms.

Typical applications include:

  • Industrial stair treads
  • Equipment access steps
  • Loading ramps
  • Maintenance ladders and platforms
  • Commercial service-area steps

When used in public or industrial access systems, the plate should meet the project’s applicable structural and slip-resistance requirements.

Patterned aluminum alone does not guarantee compliance with a specific safety standard.

7.4 Equipment Covers and Protective Panels

Manufacturers use 3003 H22 diamond plate for protective panels and covers that need a textured, lightweight metal surface.

Examples include:

  • Machinery covers
  • Equipment access panels
  • Protective enclosures
  • Maintenance compartment doors
  • Tool cabinets and storage boxes

The material’s formability supports customized cutting and bending, while its corrosion resistance makes it useful in many indoor and general outdoor environments.

For electrical cabinets and precision equipment enclosures, manufacturers should also consider grounding, electrical insulation requirements, fastening design, and dimensional tolerances.

Protective Panels Aluminum Diamond Plate

Protective Panels Aluminum Diamond Plate

7.5 Commercial Buildings and Public Facilities

Commercial and public facilities use aluminum tread plate in areas that require practical access surfaces and protective metal panels.

Typical applications include:

  • Utility room flooring
  • Building maintenance corridors
  • Service platforms
  • Access covers
  • Decorative wall and floor panels

Its metallic appearance works well in industrial-style interiors and utility spaces.

The lightweight structure also simplifies installation in selected non-structural applications.

7.6 Marine and Recreational Equipment

3003 H22 diamond plate may also be used in selected recreational and marine-related equipment, tulad ng:

  • Recreational vehicle flooring
  • Camper and trailer access panels
  • Storage compartments
  • Selected boat interior panels
  • Lightweight equipment platforms

Gayunpaman, continuous saltwater exposure and marine service conditions require careful material evaluation.

For more demanding marine environments, alloys such as 5052 o 5083 may offer more appropriate corrosion-resistance and strength characteristics, depende sa application.

3003 H22 Aluminum Diamond Plate for Building

3003 H22 Aluminum Diamond Plate for Building

8. 3003 H22 Aluminum Diamond Plate vs. Other Aluminum Alloys

Choosing the right aluminum diamond plate requires evaluating mechanical strength, paglaban sa kaagnasan, pagiging formable, bigat ng katawan, at gastos.

Although different aluminum alloys may share similar tread patterns, their chemical compositions and tempers result in different performance characteristics.

3003 H22 is generally suitable for general-purpose applications requiring moderate strength and convenient fabrication.

Gayunpaman, 5052 H32 at 6061 T6 may be more appropriate when projects demand higher strength or specific structural properties.

8.1 Comparison of Key Characteristics

The following table compares four commonly considered aluminum materials for tread plate and related fabrication applications.

Pag-aari 3003 H22 5052 H32 6061 T6 1100 H14
Serye ng haluang metal 3xxx 5xxx 6xxx 1xxx
Main Alloying Elements Mn Mg, Cr Mg, Si Si Cu (minor)
Densidad ng katawan (g/cm³) 2.73 2.68 2.70 2.70
Lakas ng Paghatak (MPa) Humigit-kumulang. 120–180 Humigit-kumulang. 220–260 Humigit-kumulang. 290–310 Humigit-kumulang. 110–145
Yield Lakas (MPa) Humigit-kumulang. 80–90 Humigit-kumulang. 160–190 Humigit-kumulang. 240–276 Humigit-kumulang. 90–120
Pagpapahaba (%) Humigit-kumulang. 4–7 Humigit-kumulang. 8–12 Humigit-kumulang. 8–12 Humigit-kumulang. 5–10
Paglaban sa Kaagnasan Mabuti na lang Napakaganda Mabuti na lang Napakaganda
Formability Mabuti na lang Mabuti na lang Fair Napakaganda
Weldability Mabuti na lang Mabuti na lang Mabuti na lang, with procedure considerations Mabuti na lang
Typical Advantage Balanced performance and workability Higher strength and marine suitability High strength and machinability High purity and excellent workability

Tala: Mechanical values are approximate comparison ranges, not guaranteed minimums for every thickness.

Tread-plate product data, sheet or plate standards, and temper-specific requirements may differ.

Verify the actual product specification and MTC before material substitution.

9. Proseso ng Paggawa ng 3003 H22 Aluminum Diamond Plate

Diamond plate quality is built step by step. Para sa 3003 H22, three things need particular care: the manganese level, the partial annealing that creates the H22 temper, and the embossing stage.

This section focuses on what is specific to this alloy and temper.

9.1 Melting and alloy control

Production starts with primary aluminum ingot, to which manganese is added to reach the 3003 range of 1.0 sa 1.5%.

  • The melt is analyzed with a spectrometer, and composition is adjusted before casting.
  • Manganese must be evenly distributed, since segregation causes uneven strength and surface defects later.
  • Refining and degassing remove hydrogen and inclusions that would otherwise cause surface flaws.

9.2 Paghahagis

The refined metal is cast by one of two common routes:

  • D at T (direct chill) paghahagis ng mga: produces thick slabs for hot rolling, usually preferred for wider, mas makapal, and more demanding plate.
  • Continuous casting (CC): produces strip directly, with lower energy use and cost, suited to many standard thickness ranges.

The choice affects grain structure, kalidad ng ibabaw, at gastos. A manufacturer should be able to explain which route applies to your order.

9.3 Homogenizing and hot rolling

  • DC slabs are heated (homogenized) to even out the manganese distribution in the structure.
  • Hot rolling then reduces the slab to an intermediate thickness and breaks down the cast structure.

9.4 Malamig na pagulong

Cold rolling brings the sheet to the target thickness, improves surface finish and flatness, and strain-hardens the metal.

Strict gauge control keeps thickness consistent along the full length and width.

9.5 Partial annealing to reach H22

This is the step that defines the temper.

  1. The sheet is cold rolled beyond the final hardness level.
  2. It is then partially annealed at a controlled temperature and time, softening it back to the quarter-hard H22 level.

The result is a plate with moderate strength and better ductility than one hardened only to the same level (H12).

Temperature and time must be tightly controlled. Poor annealing leads to coil-to-coil variation in hardness, which shows up as inconsistent bending behavior.

9.6 Pag-embossing

Embossing creates the raised pattern.

  1. The sheet passes between a patterned roll and a smooth or counter roll.
  2. Pressure presses the pattern into one surface.
  3. Pattern height depends on roll design, presyon, and the base temper.

9.7 Pag-level, pagputol ng hiwa, and cutting

  • Tension or roller leveling removes waviness and residual stress.
  • Slitting and cutting bring the plate to ordered width and length with clean edges.
  • Edge burrs and camber (sideways bow) are checked.

9.8 Surface protection and packaging

  • Protective film or interleaving paper is applied where required.
  • Plates are stacked on wooden pallets or packed in cases, with moisture-proof wrapping and edge protection for export.
Huawei Aluminum Diamond Plate Display

Huawei Aluminum Diamond Plate Display

10. Factors Affecting the Price of 3003 H22 Aluminum Diamond Plate

Aluminum diamond plate pricing moves with the metal market, so this section explains the mechanism instead of quoting prices, which date quickly.

Kadahilanan How It Affects Price
Aluminum market price The largest share. Follows LME aluminum and regional premiums
Alloying cost Manganese addition makes 3003 slightly costlier than 1060
Processing premium Paggulong, annealing, and embossing add cost on top of metal value
Ang kapal Thicker plate uses more metal per sheet, although thin gauges can carry a higher processing premium
Temper H22 requires an extra partial-annealing step compared with some tempers
Pattern type and height Special patterns or deeper patterns may need dedicated rolls
Width and length Non-standard sizes reduce production efficiency
Surface finish Pagpapahid ng langis, pagpipinta, and film add cost
Order quantity Larger orders spread setup cost across more tonnage
Packaging and documents Special packing, labeling, and third-party inspection add cost
Freight and trade terms FOB, CFR, and CIF differ in what is included

11. Procure Aluminum Alloy Products from Huawei

Henan Huawei Aluminyo Co., Ltd. is an aluminum product supplier established in 2001.

The company focuses on aluminum sheet, plate, likawin ang, papel de liha, hubad, and circle products, serving customers in international markets.

For buyers sourcing 3003 H22 aluminum diamond plate and other aluminum alloy products, choosing a supplier involves more than comparing prices.

Material consistency, katumpakan ng sukat, processing capabilities, quality documentation, and export support all contribute to a reliable purchasing experience.

11.1 Wide Range of Aluminum Alloy Products

Huawei Aluminum supplies various aluminum product forms for industrial, commercial, transportasyon, pag iimpake, and manufacturing applications.

Its main product categories include:

Buyers can discuss alloy selection, Pamahiin, dimensions, and surface requirements according to their intended applications.

11.2 Customized Specifications and Processing

Different projects require different material dimensions and processing conditions.

Huawei Aluminum can discuss customized aluminum product requirements based on the product type and confirmed production capabilities.

Depending on the product and order requirements, available processing options include:

  • Cut-to-size processing
  • Slitting and shearing
  • Embossing and patterned surfaces
  • Kulay ng patong
  • Pagpapahid ng langis
  • Mirror finishing

Para sa 3003 H22 aluminum diamond plate, buyers should confirm the availability of the exact alloy, Pamahiin, pattern, dimensions, and finish before placing an order.

11.3 International Export Experience

Itinatag sa 2001, Huawei Aluminum has more than two decades of experience in aluminum manufacturing and international trade.

Its products have been exported to more than 70 mga bansa, serving customers across different industrial markets.

The company supports export orders through product communication, specification confirmation, packaging coordination, and shipping arrangements.

For overseas buyers, clear communication about product specifications, inspection requirements, delivery schedules, and packaging helps reduce procurement risks.

11.4 Common Trade Terms Partnering With Huawei

Term Supplier handles Buyer handles Best for
FOB Export clearance and delivery on board Main freight, insurance, import Buyers with own logistics
CIF Freight and insurance to destination port Import clearance and onward Simpler port-to-port buying
DDP Transport, duties and clearance to door Receipt at named place Hands-off delivered pricing

12. Pangwakas na Salita

3003 H22 aluminum diamond plate combines the lightweight characteristics of aluminum with the practical benefits of a raised tread pattern.

Its good corrosion resistance, katamtamang lakas, and formability make it suitable for industrial flooring, vehicle components, mga hakbang, mga rampa, equipment covers, and other general-purpose applications.

When selecting this material, buyers should consider more than the alloy designation.

Base-metal thickness, pattern height, sheet dimensions, mekanikal na mga katangian, Pagtatapos ng Ibabaw, and operating conditions all influence product performance.

Compared with other aluminum alloys, 3003 H22 offers a practical balance of strength, workability, at gastos.

For applications requiring higher strength or more demanding corrosion resistance, alternatives such as 5052 H32 or 6061 T6 may be worth evaluating.

Working with an experienced aluminum supplier also helps buyers confirm material specifications, processing requirements, quality documentation, and delivery arrangements.

Huawei Aluminum provides a range of aluminum products and customized processing solutions to support different industrial purchasing needs.

Mga FAQ

1. Ano ang 3003 H22 aluminum diamond plate?

It is a manganese-alloy aluminum tread plate with a raised diamond pattern. It combines moderate strength, magandang paglaban sa kaagnasan, and a textured surface for improved traction.

2. What does H22 temper mean?

H22 indicates that the aluminum has undergone strain hardening followed by partial annealing. This temper provides a balance of strength and formability.

3. Is 3003 H22 aluminum diamond plate corrosion-resistant?

Oo nga. It offers good resistance to corrosion in normal atmospheric conditions, making it suitable for many indoor and outdoor applications. More aggressive environments may require a different alloy.

4. What thicknesses are available?

Common commercial thicknesses are approximately 1.1–6.35 mm. Custom thicknesses and dimensions may be available depending on the supplier.

5. Maaari bang 3003 H22 diamond plate be bent and welded?

Oo nga. It supports common fabrication processes, including cutting, pagbaluktot, and welding. Proper tooling and welding procedures help maintain the finished product’s quality.

6. How does 3003 H22 compare with 5052 H32?

3003 H22 offers good formability and general-purpose corrosion resistance. 5052 H32 provides higher strength and better performance in demanding environments, including many marine applications.

7. What is the difference between base thickness and overall thickness?

Base thickness measures the aluminum sheet without the raised pattern. Overall thickness includes the raised diamonds. Buyers should confirm which measurement the supplier uses.

8. Which standards apply to 3003 H22 aluminum diamond plate?

ASTM B209 is commonly specified for aluminum sheet and plate. EN 573 and EN 485 series may also apply to alloy composition, mekanikal na mga katangian, and dimensional requirements.

Proseso ng paghahagis ng produksyon at ang pagpapakilala nito

Ang layunin ng pagtunaw at paghahagis ay upang makabuo ng mga haluang metal na may kasiya siyang komposisyon at mataas na kadalisayan ng matunaw, upang lumikha ng mga kanais nais na kondisyon para sa paghahagis ng mga haluang metal ng iba't ibang mga hugis.

Mga hakbang sa proseso ng pagtunaw at paghahagis: mga ka batch --- pagpapakain --- natutunaw na --- pagpapakilos pagkatapos matunaw, pag alis ng slag --- sampling bago ang pagsusuri --- pagdaragdag ng haluang metal upang ayusin ang komposisyon, nakakapukaw ng damdamin --- pagpipino --- static na Setting——Guide furnace casting.

Mainit na proseso ng produksyon ng pagulong at ang pagpapakilala nito

  • 1. Mainit na pagulong sa pangkalahatan ay tumutukoy sa paggulong sa itaas ng metal recrystallization temperatura;
  • 2. Sa panahon ng mainit na proseso ng pagulong, ang metal ay may parehong mga proseso ng pagpapatigas at paglambot. Dahil sa impluwensya ng bilis ng pagpapapangit, basta huli na ang recovery at recrystallization process, magkakaroon ng tiyak na gawaing pagpapatigas;
  • 3. Ang recrystallization ng metal pagkatapos ng mainit na pagulong ay hindi kumpleto, na ang ibig sabihin ay, ang magkakasamang buhay ng recrystallized istraktura at deformed istraktura;
  • 4. Ang mainit na pagulong ay maaaring mapabuti ang pagganap ng pagproseso ng mga metal at haluang metal, bawasan o alisin ang mga depekto sa paghahagis.
    • Mainit na kagamitan sa pagulong

      Proseso ng paghahagis at paggulong

      Proseso ng paghahagis at paggulong: likidong metal, kahon sa harap (Kontrol sa antas ng likido), paghahagis at rolling machine (sistema ng pagpapadulas, paglamig ng tubig), paggupit ng makina, makina ng pag coiling.

      • 1. Ang temperatura ng paghahagis at pagulong ay karaniwang nasa pagitan ng 680 o C at 700 o C. Ang mas mababa ang mas mahusay na, Ang matatag na paghahagis at rolling line ay karaniwang tumitigil nang isang beses sa isang buwan o higit pa upang muling tumayo. Sa panahon ng proseso ng produksyon, kinakailangang mahigpit na kontrolin ang antas ng likido ng front tank upang maiwasan ang mababang antas ng likido;
      • 2. Ang pagpapadulas ay gumagamit ng C powder na may hindi kumpletong pagkasunog ng gas para sa pagpapadulas, na isa rin sa mga dahilan ng maruming ibabaw ng casting at rolling materials;
      • 3. Ang bilis ng produksyon ay karaniwang sa pagitan ng 1.5m / min-2.5m / min;
      • 4. Ang kalidad ng ibabaw ng mga produkto na ginawa sa pamamagitan ng paghahagis at paggulong ay karaniwang medyo mababa, at sa pangkalahatan ay hindi maaaring matugunan ang mga produkto na may espesyal na pisikal at kemikal na mga kinakailangan sa pagganap.
        • Malamig na proseso ng produksyon ng pagulong

          • 1. Ang malamig na pagulong ay tumutukoy sa paraan ng paggulong ng produksyon sa ibaba ng temperatura ng recrystallization;
          • 2. Hindi magkakaroon ng dynamic na recrystallization sa panahon ng proseso ng paggulong, at ang temperatura ay tataas sa temperatura ng pagbawi sa karamihan, at ang malamig na paggulong ay lilitaw sa isang trabaho hardening estado, at ang trabaho hardening rate ay magiging malaki;
          • 3. Ang malamig na ginulong sheet at strip ay may mataas na dimensional na katumpakan, magandang kalidad ng ibabaw, unipormeng istraktura at pagganap, at mga produkto sa iba't ibang estado ay maaaring makuha sa heat treatment;
          • 4. Malamig na pagulong ay maaaring i roll out manipis na strips, pero sabay sabay, ito ay may mga disadvantages ng mataas na pagkonsumo ng enerhiya para sa pagpapapangit at maraming mga pasa sa pagproseso.
            • Paghahagis ng mga rolling

              Panimula sa pagtatapos ng proseso ng produksyon

              • 1. Ang pagtatapos ay isang paraan ng pagproseso upang matugunan ng malamig na ginulong sheet ang mga kinakailangan ng customer, o upang mapadali ang kasunod na pagproseso ng produkto;
              • 2. Ang mga kagamitan sa pagtatapos ay maaaring iwasto ang mga depekto na ginawa sa mainit na pagulong at malamig na proseso ng produksyon, tulad ng basag na gilid, may langis na, mahina ang hugis ng plato, natitirang stress, atbp. Kailangan nitong tiyakin na walang iba pang mga depekto na dinala sa proseso ng produksyon;
              • 3. Mayroong iba't ibang mga kagamitan sa pagtatapos, pangunahin kabilang ang cross-cutting, pagputol ng hiwa, pag unat at pagtutuwid, annealing furnace, mga slitter, atbp.

Aluminyo haluang metal ay may mga katangian ng mababang density, magandang mekanikal na katangian, magandang pagganap ng pagproseso, di nakakalason, madaling i recycle, mahusay na electrical kondaktibiti, paglipat ng init at paglaban sa kaagnasan, kaya ito ay may malawak na hanay ng mga application.

Aerospace: ginagamit upang gumawa ng mga balat ng sasakyang panghimpapawid, mga frame ng fuselage, mga girder, mga rotors, mga propeller, mga tangke ng gasolina, mga panel ng pader at mga struts ng landing gear, pati na rin ang rocket forging rings, mga panel ng pader ng spacecraft, atbp.

Aluminyo haluang metal na ginagamit para sa aerospace

Aluminyo haluang metal na ginagamit para sa aerospace

Transportasyon: ginagamit para sa kotse katawan istraktura materyales ng mga sasakyan, Mga Sasakyan ng Subway, mga kotse ng pasahero ng tren, mabilis na mga kotse ng pasahero, mga pinto at bintana, mga istante, mga bahagi ng automotive engine, mga aircon, mga radiator, mga panel ng katawan, mga gulong at mga materyales ng barko.

Application ng trapiko

Application ng trapiko

Packaging: Ang lahat ng aluminyo pop lata ay pangunahing ginagamit bilang mga materyales sa packaging ng metal sa anyo ng mga manipis na plato at foils, at ginagawang lata, mga takip, mga bote, mga bariles, at packaging foils. Malawakang ginagamit sa packaging ng mga inumin, pagkain, mga pampaganda, mga gamot, mga sigarilyo, mga produktong pang industriya, mga gamot, atbp.

Application ng packaging

Application ng packaging

Pag-print: Pangunahing ginagamit upang gumawa ng PS plates, ang mga PS plate na nakabase sa aluminyo ay isang bagong uri ng materyal sa industriya ng pag print, ginagamit para sa awtomatikong paggawa ng plato at pag print.

Pag print ng PS

Pag print ng PS

Dekorasyon ng arkitektura: aluminyo haluang metal ay malawakang ginagamit sa mga istraktura ng gusali, mga pinto at bintana, suspendido ang mga kisame, pandekorasyon na ibabaw, atbp. dahil sa magandang kaagnasan nito paglaban, sapat na lakas, mahusay na pagganap ng proseso at pagganap ng hinang.

Application ng konstruksiyon ng haluang metal ng aluminyo

Application ng konstruksiyon ng haluang metal ng aluminyo

Mga produktong elektroniko: mga computer, mga mobile phone, mga shell ng refrigerator, mga radiator, atbp.

Electronic application ng produkto

Electronic application ng produkto

Mga gamit sa kusina: mga kaldero ng aluminyo, aluminyo basins, mga liner ng rice cooker, sambahayan aluminyo foil, atbp.

Application ng kusina

Application ng kusina

Packaging Ng Aluminum Sheet / Coil

Ang bawat detalye ng packaging ay kung saan namin ituloy ang perpektong serbisyo. Ang aming proseso ng packaging sa kabuuan ay ang mga sumusunod:

Paglalamina: malinaw na pelikula, asul na pelikula, mikro-mucosal, mataas na mucosal, laser pagputol ng pelikula (2 mga tatak, Novacell at Polyphem);

Proteksyon: mga tagapagtanggol ng sulok ng papel, mga pads laban sa presyon;

pagpapatayo ng mga: desiccant;

Tray: fumigated hindi nakakapinsala kahoy na tray, magagamit muli ang bakal na tray;

Pag-iimpake: Tik-tik-toe bakal sinturon, o PVC packing belt;

Kalidad ng Materyal: Ganap na libre mula sa mga depekto tulad ng puting kalawang, mga spot ng langis, mga rolling mark, pinsala sa gilid, mga baluktot, mga dent, mga butas, mga break lines, mga gasgas na, atbp., walang coil set.

Port: Qingdao o iba pang mga port sa China.

Lead oras: 15-45 mga araw.

Ano ang 1060 purong aluminyo sheet

Aluminyo sheet / plate packaging proseso

Ano ang 1060 purong aluminyo sheet

Aluminyo likawin packaging proseso

F: Ikaw ba ay isang tagagawa o isang mangangalakal?

Q: Kami ay isang tagagawa, ang factory namin ay sa No.3 Weier Road, Sonang Pang industriya, Gongyi, Henan, Tsina.

F: Ano ang MOQ para sa pag order ng produkto?

Q: Ang MOQ natin ay 5 tonelada, at ang ilang mga espesyal na produkto ay magkakaroon ng isang minimum na dami ng order ng 1 o 2 tonelada.

F: Gaano katagal ang iyong oras ng lead?

Q: Sa pangkalahatan ang aming lead time ay tungkol sa 30 mga araw.

F: Mayroon bang kalidad ng katiyakan ang iyong mga produkto?

Q: Oo nga, kung may problema sa quality sa products namin, kami ay mabayaran ang customer hanggang sa sila ay nasiyahan.

Wala na ba, ito na ang Pinakabagong artikulo


Mga Pinakabagong Blog

5052 mga bes 6061 Aluminyo

5052 mga bes 6061 Aluminyo: Mga Pangunahing Pagkakaiba & Best Uses

Compare 5052 mga bes 6061 aluminum for strength, paglaban sa kaagnasan, pagiging formable, at machining. Discover which alloy best fits your project.

Common Alloys of Reefer Truck Used PE Coated Aluminum Coil

Common Alloys of Reefer Truck Used PE Coated Aluminum Coil

Discover common alloys of reefer truck used PE coated aluminum coil, kasama na ang 3003, 3004, at 3105. Designed for excellent corrosion resistance, pagiging formable, and long-lasting outdoor performance.

Is Aluminum Conductive

Is Aluminum Conductive? Mga Katangian, Gumagamit ng mga & Benefits Explained

Is aluminum conductive? Discover aluminum's electrical conductivity, key advantages, and why it is widely used in power transmission and industrial applications.

Is Aluminum Foil Recyclable

Unlocking Sustainability: The Truth About Aluminum Foil Recycling

Is Aluminum Foil Recyclable? Learn how aluminum foil can be recycled, how to prepare it properly, and why recycling helps reduce waste and save resources.


Makipag ugnay sa amin

Address

No.52, Dongming Road,
Zhengzhou, Henan, Tsina

Mag-email sa Amin

[email protected]

Tumawag sa Amin

Tel:+86-371-66302886
Whatsapp:+8618137782032

Mga Sertipiko ng Huawei

Pinagkakatiwalaang Aluminum Sheet / Coil, Aluminum Foil, Aluminyo Strip, Tagagawa ng Aluminum Circle
Nagbibigay kami ng mataas na kalidad na mga produkto lamang


Whatsapp / Wechat
+8618137782032
whatsapp wechat

[email protected]