3004 aluminum sheet, similar to 3003, but higher in strength than 3003 aluminum sheet, has good processability, formability and corrosion resistance, and 3004 aluminum alloy cannot be strengthened by heat treatment.
3004 aluminum sheet is an important member of the 3000 series Al-Mn alloy and one of the most widely used alloys. 3000 series aluminum alloys also includes:
UNS A93004, ISO AlMn1Mg1, Aluminum 3004, AA3004, Al3004
The 3004 aluminum sheet plate provided by Huawei Aluminum meets the following standards:
ASTM B209
EN573
EN 485
Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
---|---|---|---|---|---|---|---|---|---|---|
Content (max) | 0.30 | 0.70 | 0.25 | 1.0-1.5 | 0.8-1.3 | – | 0.25 | 0.23 | 0.15 | 95.6-98.2 |
3004 aluminum alloy is an alloy containing Mn and Mg. The alloy components of 3004 are similar to 3003, but there is 1% more magnesium.
Properties | Metric | Imperial |
---|---|---|
Density | 2.6-2.8 g/cm3 | 0.0939- 0.101 lb/in3 |
Melting point | 633°C | 1170°F |
The mechanical properties of Aluminium / Aluminum 3004 alloy are outlined in the following table.
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 215 MPa | 31183 psi |
Yield strength | 170 MPa | 24656 psi |
Shear strength | 115 MPa | 16680 psi |
Fatigue strength | 105 MPa | 15229 psi |
Elastic modulus | 70-80 GPa | 10153-11603 ksi |
Poisson’s ratio | 0.33 | 0.33 |
Elongation | 10% | 10% |
Hardness | 52 | 52 |
Alloy | 3004 alloy (3000 series) |
Thickness | 0.20-50mm |
Width | 500-2600mm |
Length | 500-2600mm |
Thickness Tolerance | ±0.02mm |
Temper | F, H112, O, H111, H12, H22, H32, H14, H24, H34, H16, H26, H18, H28, H38 |
Production | Hot rolled or Cold rolled |
Surface Technology | Mill Finish, Polished, Brushed, Embossed, Powder coating, Anodizing, ,Perforated Aluminum Sheet |
Payment | TT or LC |
Typical application | Cans manufacture, aluminum sheets for roof tiles, Heat sink materials such as liquid crystal back. |
Huawei Aluminum supports customization, if you need 3004 aluminum sheet with special specifications, please contact us.
3004 aluminum sheet is a kind of 3000 or 3xxx series aluminum-manganese alloy. It is similar to 3003, but its strength is higher than that of 3003 aluminum alloy. It can be cold-worked to produce a state with high strength but low ductility.
The typical characteristics of 3004 are as follows:
1. High Plasticity. 3004 aluminium sheet has excessive plasticity in annealing kingdom, good plasticity in semi-bloodless hardening and occasional plasticity in cold hardening.
2. Finish Well. It could adapt to the maximum velocity that maximum gadget equipment can achieve with the intention to milling, uninteresting, making plans and different mechanical processing. Further, 3004 aluminum sheet has excellent weldability however bad machinability.
3. Slightly Higher Intensity. With the addition of the alloy thing Mn, even as keeping the amazing workability and corrosion resistance of natural aluminium, the power of the 3004 aluminium sheet is barely multiplied, better than that of the 3003 aluminum sheet, and 10% better than that of the 1100 series.
4. Good Anodic Oxidation. The surface of the 3004 aluminum sheet after anodized has improved corrosion resistance and also can gift colourful hues.
3004 aluminum alloy is widely used in industry, mainly due to its excellent performance and characteristics. The following are some common applications of 3004 aluminum alloy:
3004 aluminum alloy is widely used in many industrial and everyday applications due to its good formability, corrosion resistance and strength characteristics.
Huawei Aluminum is a manufacturer with 22 years of experience in the production of 3004 aluminum sheets, with advanced production equipment and skilled workers, and exports 5000w tons of aluminum products to the world every year.
The above points are our long-term adherence to protect the rights and interests of customers. If you have any special requirements, please contact us by email: [email protected], and we will try our best to answer for you.
The purpose of melting and casting is to produce alloys with satisfactory composition and high purity of melt, so as to create favorable conditions for casting alloys of various shapes.
Melting and casting process steps: batching --- feeding --- melting --- stirring after melting, slag removal --- pre-analysis sampling --- adding alloy to adjust the composition, stirring --- refining --- static Setting——Guide furnace casting.
Casting and rolling process: liquid metal, front box (liquid level control), casting and rolling machine (lubrication system, cooling water), shearing machine, coiling machine.
Aluminum alloy has the characteristics of low density, good mechanical properties, good processing performance, non-toxic, easy to recycle, excellent electrical conductivity, heat transfer and corrosion resistance, so it has a wide range of applications.
Aerospace: used to make aircraft skins, fuselage frames, girders, rotors, propellers, fuel tanks, wall panels and landing gear struts, as well as rocket forging rings, spacecraft wall panels, etc.
Aluminum alloy used for aerospace
Transportation: used for car body structure materials of automobiles, subway vehicles, railway passenger cars, high-speed passenger cars, doors and windows, shelves, automotive engine parts, air conditioners, radiators, body panels, wheels and ship materials.
Traffic application
Packaging: All-aluminum pop cans are mainly used as metal packaging materials in the form of thin plates and foils, and are made into cans, lids, bottles, barrels, and packaging foils. Widely used in the packaging of beverages, food, cosmetics, medicines, cigarettes, industrial products, medicines, etc.
Packaging application
Printing: Mainly used to make PS plates, aluminum-based PS plates are a new type of material in the printing industry, used for automatic plate making and printing.
PS printing
Architectural decoration: aluminum alloy is widely used in building structures, doors and windows, suspended ceilings, decorative surfaces, etc. due to its good corrosion resistance, sufficient strength, excellent process performance and welding performance.
Aluminum alloy construction application
Electronic products: computers, mobile phones, refrigerator shells, radiators, etc.
Electronic product application
Kitchen supplies: aluminum pots, aluminum basins, rice cooker liners, household aluminum foil, etc.
Kitchen application
Every detail of packaging is where we pursue perfect service. Our packaging process as a whole is as follows:
Lamination: clear film, blue film, micro-mucosal, high-mucosal, laser cutting film (2 brands, Novacell and Polyphem);
Protection: paper corner protectors, anti-pressure pads;
drying: desiccant;
Tray: fumigated harmless wooden tray, reusable iron tray;
Packing: Tic-tac-toe steel belt, or PVC packing belt;
Material Quality: Completely free from defects such as white rust, oil spots, rolling marks, edge damage, bends, dents, holes, break lines, scratches, etc., no coil set.
Port: Qingdao or other ports in China.
Lead time: 15-45 days.
Aluminum sheet/plate packaging process
Aluminum coil packaging process
F: Are you a manufacturer or a trader?
Q: We are a manufacturer, our factory is at No.3 Weier Road, Industrial Zone, Gongyi, Henan, China.
F: What is the MOQ for ordering the product?
Q: Our MOQ is 5 tons, and some special products will have a minimum order quantity of 1 or 2 tons.
F: How long is your lead time?
Q: Generally our lead time is about 30 days.
F: Do your products have quality assurance?
Q: Yes, if there is a quality problem with our products, we will compensate the customer until they are satisfied.
1060 mirror aluminum sheet is an aluminum plate made of 1060 series aluminum alloy with a purity of more than 99.6% as the base material. It is made through special processing technology.
Aluminum foil and tin foil are two common metal sheet materials. They are similar in appearance, both have a silver-white metallic luster, and are often used in daily life to wrap food, perform baking or grilling and other cooking operations.
7075 aluminum alloy is a high-strength aluminum alloy. It belongs to the Al-Zn-Mg-Cu alloy series and is a representative product of the 7000 series aluminum alloy.
Although aluminum and aluminum alloys both use aluminum as the main synthetic element, they have great differences in certain physical and chemical properties.
No.52, Dongming Road,
Zhengzhou, Henan, China
Tel:+86-371-66302886
Whatsapp:+8618137782032