1. Panimula
6082 aluminum tread plate is a high-strength aluminum flooring material designed for applications that require a combination of slip resistance, structural strength, low weight, at paglaban sa kaagnasan.
It is based on EN AW-6082, a heat-treatable Al-Mg-Si alloy widely used for structural and engineering applications.
Unlike plain aluminum sheet, tread plate features a raised surface pattern that improves traction and provides a distinctive industrial appearance.
This makes it suitable for walkways, mga plataporma, hagdanan na, mga sahig ng sasakyan, mga rampa, machinery access areas, and other surfaces where secure footing is important.
The main advantage of 6082 is its relatively high strength within the 6xxx aluminum family.
In T6 condition, EN AW-6082 rolled products have minimum tensile strength requirements that vary with thickness; halimbawa na lang, EN 485-2 data list a minimum tensile strength of 310 MPa for 1.5–3.0 mm material and 300 MPa for 6.0–12.5 mm material.
The performance of a tread plate depends on more than alloy designation alone. haluang metal, Pamahiin, kapal naman, tread geometry, patag na, surface condition, and manufacturing quality all influence the final product.
For this reason, 6082 aluminum tread plate should be specified according to the actual loading, pagbuo ng, machining, and environmental requirements of the application.
Huawei 6082 Aluminum Tread Plate
2. Ano ang 6082 Aluminum Tread Plate?
2.1 Buod ng 6082 aluminyo haluang metal
6082 aluminyo is an Al-Mg-Si-Mn alloy in the 6000 serye ng mga. Silicon and magnesium provide the basis for precipitation hardening, while manganese contributes to the alloy’s strength and structural characteristics. Its chemical composition is controlled under standards such as EN 573-3.
Compared with softer non-heat-treatable alloys, 6082 can achieve substantially higher strength through solution heat treatment and artificial aging.
The T6 temper is therefore widely used when a tread plate requires higher load-bearing capability.
6082 also provides good general corrosion resistance, kakayahang machining, at weldability, making it suitable for a wide range of engineering applications.
2.2 What Is an Aluminum Tread Plate?
Isang aluminum tread plate is a flat-rolled aluminum product with a raised pattern on one surface.
The pattern increases surface traction and helps reduce the risk of slipping compared with a smooth aluminum sheet.
Tread plate is also known as:
- Aluminum checker plate
- Aluminum diamond plate
- Aluminum floor plate
- Aluminum chequered plate
The exact pattern geometry can vary by manufacturer and specification. Common commercial designs include diamond and multi-bar patterns.
The raised pattern also affects the effective thickness and weight of the finished product.
Kaya nga, when specifying a tread plate, buyers should distinguish between the base metal thickness and overall patterned thickness where applicable.
2.3 How Does the Tread Pattern Improve Performance?
The raised pattern creates a more textured contact surface for footwear, tires, and equipment.
This is particularly useful in areas where water, langis, alikabok na, or other contaminants may reduce traction.
The tread pattern also provides a practical visual distinction between flooring surfaces and ordinary flat sheet.
Gayunpaman, the pattern should not be treated as a substitute for application-specific slip testing when a project has defined safety requirements.
For industrial flooring, the choice of pattern should consider the environment, cleaning requirements, traffic type, and expected load.
2.4 6082 Tread Plate vs Plain 6082 Aluminyo Plate
Both products use the same basic 6082 haluang metal, but their surface structures and typical applications are different.
| Tampok | 6082 Aluminum Tread Plate | 6082 Plain Aluminum Plate |
|---|---|---|
| Ibabaw | Raised pattern | Flat |
| Paglaban sa Slip | Mas Mataas | Mas mababa |
| Surface Function | Anti-slip and decorative | Structural/fabrication surface |
| Mga Karaniwang Aplikasyon | Sahig na gawa sa sahig, mga plataporma, mga hakbang, mga rampa | Structural parts, machining, gawa gawa lang |
| Timbang | Slightly higher due to raised pattern | Lower for the same base thickness |
| Paglilinis | Pattern may retain dirt or liquids | Easier to clean |
| Appearance | Industrial patterned finish | Smooth mill finish |
The tread version is generally selected when surface traction is important, while plain 6082 plate is more suitable when machining, hinang, gawa gawa lang, or a flat surface is the primary requirement.
6082 Aluminum Tread Plate for Stairs
3. Mga pagtutukoy ng 6082 Aluminum Tread Plate
| Specification | Details |
|---|---|
| haluang metal | EN AW-6082 / AlSi1MgMn |
| Temper | T4, T6, T651 |
| Product Type | Aluminum Tread Plate, Checker Plate, Diamond Plate |
| Base Thickness | Typically 1.5–8.0 mm; customized according to application |
| Pattern Height | Depends on tread pattern and base thickness |
| Lapad ng katawan | Commonly 1,000–1,500 mm; custom widths available |
| Haba | Standard or cut-to-length; commonly up to 6,000 mm |
| Tread Pattern | Diamante, 1-Bar, 2-Bar, 3-Bar, 5-Bar |
| Tapos na sa ibabaw | Tapos na ang Mill, Bright Finish, Anodized, or Customized |
| Edge | Mill Edge or Cut Edge |
| Densidad ng katawan | Tinatayang 2.70 g/cm³ |
| nababanat na modulus | Tinatayang 70 GPa |
| Applicable Standards | EN 573-3, EN 1386, EN 485 serye ng mga, ASTM B632/B632M, or customer specification |
| Mga Karaniwang Aplikasyon | Industrial Flooring, Walkways, Platforms, Stairs, Ramps, Truck Floors, Machinery Access Areas |
4. Kemikal na komposisyon ng 6082 Aluminyo
6082 is an Al-Mg-Si-Mn alloy in the 6000 serye ng mga.
Silicon and magnesium provide the primary precipitation-hardening mechanism, while manganese contributes to strength and structural stability.
The chemical composition is controlled according to EN 573-3.
| Elemento | Nilalaman (wt.%) | Main Function |
|---|---|---|
| Aluminyo (Al) | Balanse | Base metal |
| Silicon (Si Si) | 0.70–1.30 | Combines with Mg for precipitation hardening |
| bakal na bakal (Fe) | ≤ 0.50 | Controlled impurity |
| Tanso (Cu) | ≤ 0.10 | Kept low to maintain corrosion resistance |
| Mga mangganeso (Mn) | 0.40–1.00 | Improves strength and structural stability |
| Magnesium (Mg) | 0.60–1.20 | Provides age-hardening response with Si |
| Chromium (Cr) | ≤ 0.25 | Helps control microstructure |
| Sink (Zn) | ≤ 0.20 | Controlled minor element |
| Titanium (Ti) | ≤ 0.10 | Helps refine grain structure |
| Iba pang mga Elemento, Ang bawat isa | ≤ 0.05 | Controlled trace elements |
| Iba pang mga Elemento, Kabuuang | ≤ 0.15 | Total limit for other elements |
5. Mga Katangian ng Mekanikal ng 6082 Aluminum Tread Plate
Ang mga mekanikal na katangian ng 6082 aluminum tread plate depend primarily on its temper and thickness.
T6 and T651 are commonly selected when higher strength is required. According to EN 485-2, the specified minimum mechanical properties change with product thickness.
6082-T6 Mechanical Properties
| Ang kapal (mm) | Tensile Strength Rm (MPa) | Yield Strength Rp0.2 (MPa) | Pagpapahaba (%) |
|---|---|---|---|
| 1.5–3.0 | ≥310 | ≥260 | ≥7 |
| 3.0–6.0 | ≥310 | ≥260 | ≥10 |
| 6.0–12.5 | ≥300 | ≥255 | ≥9 |
| 12.5–60 | ≥295 | ≥240 | ≥8 |
| 60–100 | ≥295 | ≥240 | ≥7 |
| 100–150 | ≥275 | ≥240 | ≥6 |
| 150–175 | ≥275 | ≥230 | ≥4 |
| 175–350 | ≥260 | ≥220 | ≥2 |
These values should be treated as standard-based minimum reference values for the corresponding rolled product conditions, not as a single universal value for every 6082 tread plate.
The actual certificate should identify the alloy, Pamahiin, kapal naman, applicable standard, and test results.
T6 vs. T651
| Pag-aari | 6082-T6 | 6082-T651 |
|---|---|---|
| Paggamot ng Heat | Solution treated + artificially aged | Solution treated + stress relieved + artificially aged |
| Lakas ng loob | Mataas na | Mataas na |
| Residual Stress | Mas Mataas | Mas mababa |
| Machining Stability | Mabuti na lang | Mas mahusay na |
| Karaniwang Paggamit | Sahig na gawa sa sahig, structural fabrication | Machined or dimensionally sensitive components |
T651 can be advantageous where stress relief and dimensional stability are important during subsequent machining or fabrication.
6082 Aluminum Tread Plate for Trailer
6. Katangiang Pisikal ng 6082 Aluminum Tread Plate
The physical properties of 6082 aluminum contribute to its low weight, thermal performance, and structural efficiency.
Because a tread plate contains raised material on its surface, the actual weight per square meter depends on the base thickness and tread geometry.
| Pisikal na Ari arian | Typical Value |
|---|---|
| Densidad ng katawan | ~2.70 g/cm³ |
| nababanat na modulus | ~70 GPa |
| Thermal kondaktibiti, T6 | ~172 W/m·K |
| Koepisyent ng Thermal Expansion | ~23.1 × 10⁻⁶/K |
| Electrical kondaktibiti, T6 | ~44% IACS |
| Material Family | 6xxx Series Al-Mg-Si-Mn |
7. Key Properties of 6082 Aluminum Tread Plate
6082 aluminum tread plate combines the high strength of 6082 aluminyo haluang metal with the functional benefits of a raised tread surface.
It is mainly selected for applications that require a good balance of strength, low weight, paglaban sa kaagnasan, kakayahang machining, and surface traction.
7.1 Mataas na Ratio ng Lakas sa Timbang
6082 is a high-strength 6xxx-series alloy, especially in the T6 and T651 tempers.
Its relatively low density allows manufacturers to reduce component weight while maintaining useful structural strength.
This makes it suitable for platforms, mga rampa, hagdanan na, mga sahig ng sasakyan, and industrial equipment.
7.2 Improved Surface Traction
The raised tread pattern creates a textured surface that can improve traction compared with smooth aluminum sheet.
Diamond and multi-bar patterns are commonly used for mga daanan ng mga daan, hagdanan na, mga rampa, mga plataporma, at sahig ng sasakyan.
Actual slip performance depends on the tread geometry, kahalumigmigan, contamination, footwear or tire type, and operating conditions, so application-specific testing may be required.
7.3 Good Corrosion Resistance
6082 provides good corrosion resistance for many industrial and outdoor applications.
Its natural oxide layer helps protect the aluminum surface, while anodizing or coating can provide additional protection when required.
7.4 Good Machinability and Weldability
6082 offers good machinability, particularly in T5 and T6 conditions, and can be processed through cutting, drilling, paggiling, and other conventional methods.
It can also be welded using common aluminum welding processes, although welding heat can reduce strength in the affected area.
7.5 Magaan at matibay
The combination of low density, mataas na lakas, paglaban sa kaagnasan, and a functional tread surface makes 6082 aluminum tread plate a practical alternative to heavier steel flooring in many applications.
Sa kabuuan, 6082 aluminum tread plate is best suited to projects where lakas ng loob, weight reduction, tibay ng katawan, and surface traction are more important than highly decorative surface appearance.
8. Proseso ng Paggawa ng 6082 Aluminum Tread Plate
Ang produksyon ng 6082 aluminum tread plate combines alloy preparation, pagulong gulong, paggamot ng init, pattern forming, leveling, and cutting.
Each stage affects the final plate thickness, mekanikal na mga katangian, tread consistency, at kalidad ng ibabaw.
8.1 Pagtunaw at Paghahagis
Aluminum and alloying elements are melted and adjusted to meet the required EN AW-6082 chemical composition.
The molten alloy is then cast into rolling slabs or other suitable semi-finished forms.
8.2 Homogenization and Rolling
The cast slab is homogenized to improve microstructural uniformity before rolling.
It then undergoes hot rolling and, when required, malamig na pagulong to achieve the required base thickness and material properties.
8.3 Paggamot ng Heat
For heat-treatable tempers such as T6 and T651, the rolled material undergoes solution heat treatment, pagpapawi ng, and artificial aging.
This process develops the required strength and hardness of 6082 aluminyo.
8.4 Tread Pattern Forming
The flat aluminum sheet passes through pattern-forming or embossing rolls to create the required raised design, such as diamond or multi-bar patterns.
Controlled rolling pressure helps maintain consistent pattern height and surface appearance.
8.5 Leveling and Cutting
After pattern formation and heat treatment, the plate is leveled to improve flatness and then cut to the required width and length.
Edge trimming can also be performed to meet dimensional requirements.
Pinahiran ng Kulay 6082 Aluminum Tread Plate
9. Surface Finishing of 6082 Aluminum Tread Plate
6082 aluminum tread plate is commonly supplied with a pagtatapos ng kiskisan, but additional surface treatments can be used when the application requires better corrosion protection, Paglaban sa Pagsusuot, appearance, or color.
The choice of finish should also consider the raised tread pattern and its intended use.
| Tapos na sa ibabaw | Main Benefits | Mga Karaniwang Aplikasyon |
|---|---|---|
| Tapos na ang Mill | Economical and functional | Industrial floors, mga plataporma, mga rampa |
| Pagpapahid ng langis | Improves corrosion and wear resistance | Outdoor and functional applications |
| Powder Coating | Provides color and durable protection | Mga Kagamitan, structures, outdoor applications |
| Wet Painting | Flexible color and coating options | Industrial and architectural applications |
| Brushing / Polishing | Improves surface appearance | Decorative or visible components |
9.1 Tapos na ang Mill
Mill finish is the most common option for 6082 aluminum tread plate.
It retains the natural aluminum surface produced during rolling and pattern forming and is suitable for most industrial flooring, mga daanan ng mga daan, mga plataporma, hagdanan na, and ramps.
9.2 Pagpapahid ng langis
Anodizing creates a protective aluminum oxide layer that can improve paglaban sa kaagnasan, surface hardness, Paglaban sa Pagsusuot, and cleanability.
6082 responds well to functional anodizing, although its appearance may be less uniform than alloys specifically selected for decorative anodizing.
9.3 Powder Coating
Powder coating provides a durable colored surface with additional resistance to kaagnasan, Scratching, and chipping.
It is suitable when both appearance and surface protection are important.
9.4 Wet Painting
Wet painting offers flexible color and coating options and can provide additional corrosion protection.
It is useful for industrial equipment and applications that require a specific coating system or appearance.
9.5 Mechanical Finishing
Brushing, buli na, and blasting can modify the surface appearance or prepare the aluminum for subsequent coating.
For tread plate, these processes should be carefully controlled to avoid damaging the raised pattern.
For most heavy-duty 6082 aluminum tread plate applications, mill finish is sufficient.
Pagpapahid ng langis, patong ng pulbos, or painting can be selected when additional protection or appearance requirements justify further processing.
Pickup Truck Used 6082 Aluminum Tread Plate
10. Mga aplikasyon ng 6082 Aluminum Tread Plate
6082 aluminum tread plate is mainly used where mataas na lakas, low weight, paglaban sa kaagnasan, and improved surface traction are required.
The raised pattern makes it particularly suitable for flooring and access applications, while the strength of 6082 allows it to handle demanding industrial environments.
10.1 Industrial Flooring and Platforms
6082 tread plate can be used for factory floors, Mga Platform ng Pagpapanatili, machine access areas, and elevated work platforms.
Its lightweight structure helps reduce the dead load of the installation while the raised pattern provides additional surface traction.
10.2 Walkways and Stair Treads
The textured surface makes 6082 tread plate suitable for mga daanan ng mga daan, hagdanan na, tinatapakan ang hagdan, mga rampa, and access passages.
It is especially useful where operators regularly work around equipment or where moisture and dirt may affect the walking surface.
10.3 Truck and Trailer Floors
The combination of strength and low density makes 6082 suitable for transportation applications such as truck floors, trailer floors, mga hakbang sa sasakyan, mga rampa, and access panels.
Reducing floor weight can help lower the overall vehicle weight while maintaining adequate structural performance.
6082 is widely used in transport-related structural applications because of its strength and durability.
10.4 Machinery and Industrial Equipment
6082 tread plate can be fabricated into machine platforms, equipment covers, Mga Panel ng Pag-access, protective flooring, and maintenance areas.
Its good machinability also allows cutting, drilling, and other secondary operations when required.
10.5 Construction and Infrastructure
The material can be used for construction platforms, temporary access structures, service walkways, and other lightweight structural components.
Its corrosion resistance and relatively low weight are useful where installation and handling efficiency are important.
11. 6082 Aluminum Tread Plate vs Other Aluminum Alloys
6082 is generally selected when strength is a major design requirement.
Gayunpaman, it is not automatically the best choice for every tread plate application.
Alloys such as 3003, 5052, at 6061 may offer advantages in formability, paglaban sa kaagnasan, hinang, or availability.
| Pag-aari | 6082 | 6061 | 5052 | 3003 |
|---|---|---|---|---|
| Serye ng haluang metal | 6000 | 6000 | 5000 | 3000 |
| Heat Treatable | Oo nga | Oo nga | Hindi | Hindi |
| Lakas ng loob | Mataas na | Mataas na | Katamtaman | Medium-Low |
| Paglaban sa Kaagnasan | Mabuti na lang | Mabuti na lang | Napakaganda | Napakaganda |
| Machinability | Mabuti na lang | Mabuti na lang | Katamtaman | Katamtaman |
| Weldability | Mabuti na lang | Napakaganda | Napakaganda | Napakaganda |
| Formability | Katamtaman | Katamtaman | Napakahusay | Napakahusay |
| Typical Advantage | High structural strength | Balanced strength and fabrication | Formability and corrosion resistance | Formability and cost efficiency |
| Typical Tread Applications | Heavy-duty platforms, mga rampa, structural flooring | Structural and fabricated components | Marine/general industrial flooring | General flooring and decorative applications |
12. Pangwakas na Salita
6082 aluminum tread plate combines the high-strength characteristics of EN AW-6082 aluminum with a raised surface designed to improve traction.
Its low density, magandang paglaban sa kaagnasan, kakayahang machining, and structural performance make it suitable for industrial flooring, mga plataporma, hagdanan na, mga rampa, mga sahig ng sasakyan, and equipment access areas.
For successful material selection, buyers should consider more than the alloy designation.
Temper, base thickness, tread pattern, dimensions, Pagtatapos ng Ibabaw, mekanikal na mga katangian, and applicable standards should all match the intended application.
For demanding load-bearing applications, T6 or T651 can provide the required strength, while the tread pattern adds functional surface texture.
A well-defined specification and appropriate quality inspection help ensure consistent performance in service.
Mga FAQ
1. Ano ang 6082 aluminum tread plate?
6082 aluminum tread plate is a patterned aluminum plate made from EN AW-6082 alloy. Its raised surface improves traction, habang ang 6082 alloy provides high strength and low weight.
2. Is 6082 aluminum tread plate strong?
Oo nga. 6082 is a high-strength 6xxx-series alloy, especially in T6 and T651 tempers, making it suitable for platforms, mga rampa, flooring, and other structural applications.
3. Ano ang pagkakaiba ng 6082 T6 and T651?
Both are heat-treated high-strength tempers. T651 additionally undergoes stress relief by stretching, which can improve dimensional stability during machining and fabrication.
4. Is 6082 aluminum tread plate suitable for outdoor use?
Oo nga. 6082 offers good corrosion resistance and is widely used in outdoor structures, transport equipment, mga plataporma, and infrastructure applications.
5. What tread patterns are available?
Common options include brilyante, 1-bar, 2-bar, 3-bar, and 5-bar patterns. Pattern dimensions and geometry depend on the manufacturer and specification.
6. Maaari bang 6082 aluminum tread plate be customized?
Oo nga. Suppliers can customize Pamahiin, kapal naman, lapad ng katawan, haba, tread pattern, Pagtatapos ng Ibabaw, edge condition, pag iimpake, and inspection documentation according to project requirements.
Proseso ng paghahagis ng produksyon at ang pagpapakilala nito
Ang layunin ng pagtunaw at paghahagis ay upang makabuo ng mga haluang metal na may kasiya siyang komposisyon at mataas na kadalisayan ng matunaw, upang lumikha ng mga kanais nais na kondisyon para sa paghahagis ng mga haluang metal ng iba't ibang mga hugis.
Mga hakbang sa proseso ng pagtunaw at paghahagis: mga ka batch --- pagpapakain --- natutunaw na --- pagpapakilos pagkatapos matunaw, pag alis ng slag --- sampling bago ang pagsusuri --- pagdaragdag ng haluang metal upang ayusin ang komposisyon, nakakapukaw ng damdamin --- pagpipino --- static na Setting——Guide furnace casting.
Mainit na proseso ng produksyon ng pagulong at ang pagpapakilala nito
- 1. Mainit na pagulong sa pangkalahatan ay tumutukoy sa paggulong sa itaas ng metal recrystallization temperatura;
- 2. Sa panahon ng mainit na proseso ng pagulong, ang metal ay may parehong mga proseso ng pagpapatigas at paglambot. Dahil sa impluwensya ng bilis ng pagpapapangit, basta huli na ang recovery at recrystallization process, magkakaroon ng tiyak na gawaing pagpapatigas;
- 3. Ang recrystallization ng metal pagkatapos ng mainit na pagulong ay hindi kumpleto, na ang ibig sabihin ay, ang magkakasamang buhay ng recrystallized istraktura at deformed istraktura;
- 4. Ang mainit na pagulong ay maaaring mapabuti ang pagganap ng pagproseso ng mga metal at haluang metal, bawasan o alisin ang mga depekto sa paghahagis.
- 1. Ang temperatura ng paghahagis at pagulong ay karaniwang nasa pagitan ng 680 o C at 700 o C. Ang mas mababa ang mas mahusay na, Ang matatag na paghahagis at rolling line ay karaniwang tumitigil nang isang beses sa isang buwan o higit pa upang muling tumayo. Sa panahon ng proseso ng produksyon, kinakailangang mahigpit na kontrolin ang antas ng likido ng front tank upang maiwasan ang mababang antas ng likido;
- 2. Ang pagpapadulas ay gumagamit ng C powder na may hindi kumpletong pagkasunog ng gas para sa pagpapadulas, na isa rin sa mga dahilan ng maruming ibabaw ng casting at rolling materials;
- 3. Ang bilis ng produksyon ay karaniwang sa pagitan ng 1.5m / min-2.5m / min;
- 4. Ang kalidad ng ibabaw ng mga produkto na ginawa sa pamamagitan ng paghahagis at paggulong ay karaniwang medyo mababa, at sa pangkalahatan ay hindi maaaring matugunan ang mga produkto na may espesyal na pisikal at kemikal na mga kinakailangan sa pagganap.
- 1. Ang malamig na pagulong ay tumutukoy sa paraan ng paggulong ng produksyon sa ibaba ng temperatura ng recrystallization;
- 2. Hindi magkakaroon ng dynamic na recrystallization sa panahon ng proseso ng paggulong, at ang temperatura ay tataas sa temperatura ng pagbawi sa karamihan, at ang malamig na paggulong ay lilitaw sa isang trabaho hardening estado, at ang trabaho hardening rate ay magiging malaki;
- 3. Ang malamig na ginulong sheet at strip ay may mataas na dimensional na katumpakan, magandang kalidad ng ibabaw, unipormeng istraktura at pagganap, at mga produkto sa iba't ibang estado ay maaaring makuha sa heat treatment;
- 4. Malamig na pagulong ay maaaring i roll out manipis na strips, pero sabay sabay, ito ay may mga disadvantages ng mataas na pagkonsumo ng enerhiya para sa pagpapapangit at maraming mga pasa sa pagproseso.
- 1. Ang pagtatapos ay isang paraan ng pagproseso upang matugunan ng malamig na ginulong sheet ang mga kinakailangan ng customer, o upang mapadali ang kasunod na pagproseso ng produkto;
- 2. Ang mga kagamitan sa pagtatapos ay maaaring iwasto ang mga depekto na ginawa sa mainit na pagulong at malamig na proseso ng produksyon, tulad ng basag na gilid, may langis na, mahina ang hugis ng plato, natitirang stress, atbp. Kailangan nitong tiyakin na walang iba pang mga depekto na dinala sa proseso ng produksyon;
- 3. Mayroong iba't ibang mga kagamitan sa pagtatapos, pangunahin kabilang ang cross-cutting, pagputol ng hiwa, pag unat at pagtutuwid, annealing furnace, mga slitter, atbp.
Proseso ng paghahagis at paggulong
Proseso ng paghahagis at paggulong: likidong metal, kahon sa harap (Kontrol sa antas ng likido), paghahagis at rolling machine (sistema ng pagpapadulas, paglamig ng tubig), paggupit ng makina, makina ng pag coiling.
Malamig na proseso ng produksyon ng pagulong
Panimula sa pagtatapos ng proseso ng produksyon
Aluminyo haluang metal ay may mga katangian ng mababang density, magandang mekanikal na katangian, magandang pagganap ng pagproseso, di nakakalason, madaling i recycle, mahusay na electrical kondaktibiti, paglipat ng init at paglaban sa kaagnasan, kaya ito ay may malawak na hanay ng mga application.
Aerospace: ginagamit upang gumawa ng mga balat ng sasakyang panghimpapawid, mga frame ng fuselage, mga girder, mga rotors, mga propeller, mga tangke ng gasolina, mga panel ng pader at mga struts ng landing gear, pati na rin ang rocket forging rings, mga panel ng pader ng spacecraft, atbp.
Aluminyo haluang metal na ginagamit para sa aerospace
Transportasyon: ginagamit para sa kotse katawan istraktura materyales ng mga sasakyan, Mga Sasakyan ng Subway, mga kotse ng pasahero ng tren, mabilis na mga kotse ng pasahero, mga pinto at bintana, mga istante, mga bahagi ng automotive engine, mga aircon, mga radiator, mga panel ng katawan, mga gulong at mga materyales ng barko.
Application ng trapiko
Packaging: Ang lahat ng aluminyo pop lata ay pangunahing ginagamit bilang mga materyales sa packaging ng metal sa anyo ng mga manipis na plato at foils, at ginagawang lata, mga takip, mga bote, mga bariles, at packaging foils. Malawakang ginagamit sa packaging ng mga inumin, pagkain, mga pampaganda, mga gamot, mga sigarilyo, mga produktong pang industriya, mga gamot, atbp.
Application ng packaging
Pag-print: Pangunahing ginagamit upang gumawa ng PS plates, ang mga PS plate na nakabase sa aluminyo ay isang bagong uri ng materyal sa industriya ng pag print, ginagamit para sa awtomatikong paggawa ng plato at pag print.
Pag print ng PS
Dekorasyon ng arkitektura: aluminyo haluang metal ay malawakang ginagamit sa mga istraktura ng gusali, mga pinto at bintana, suspendido ang mga kisame, pandekorasyon na ibabaw, atbp. dahil sa magandang kaagnasan nito paglaban, sapat na lakas, mahusay na pagganap ng proseso at pagganap ng hinang.
Application ng konstruksiyon ng haluang metal ng aluminyo
Mga produktong elektroniko: mga computer, mga mobile phone, mga shell ng refrigerator, mga radiator, atbp.
Electronic application ng produkto
Mga gamit sa kusina: mga kaldero ng aluminyo, aluminyo basins, mga liner ng rice cooker, sambahayan aluminyo foil, atbp.
Application ng kusina
Packaging Ng Aluminum Sheet / Coil
Ang bawat detalye ng packaging ay kung saan namin ituloy ang perpektong serbisyo. Ang aming proseso ng packaging sa kabuuan ay ang mga sumusunod:
Paglalamina: malinaw na pelikula, asul na pelikula, mikro-mucosal, mataas na mucosal, laser pagputol ng pelikula (2 mga tatak, Novacell at Polyphem);
Proteksyon: mga tagapagtanggol ng sulok ng papel, mga pads laban sa presyon;
pagpapatayo ng mga: desiccant;
Tray: fumigated hindi nakakapinsala kahoy na tray, magagamit muli ang bakal na tray;
Pag-iimpake: Tik-tik-toe bakal sinturon, o PVC packing belt;
Kalidad ng Materyal: Ganap na libre mula sa mga depekto tulad ng puting kalawang, mga spot ng langis, mga rolling mark, pinsala sa gilid, mga baluktot, mga dent, mga butas, mga break lines, mga gasgas na, atbp., walang coil set.
Port: Qingdao o iba pang mga port sa China.
Lead oras: 15-45 mga araw.
Aluminyo sheet / plate packaging proseso
Aluminyo likawin packaging proseso
F: Ikaw ba ay isang tagagawa o isang mangangalakal?
Q: Kami ay isang tagagawa, ang factory namin ay sa No.3 Weier Road, Sonang Pang industriya, Gongyi, Henan, Tsina.
F: Ano ang MOQ para sa pag order ng produkto?
Q: Ang MOQ natin ay 5 tonelada, at ang ilang mga espesyal na produkto ay magkakaroon ng isang minimum na dami ng order ng 1 o 2 tonelada.
F: Gaano katagal ang iyong oras ng lead?
Q: Sa pangkalahatan ang aming lead time ay tungkol sa 30 mga araw.
F: Mayroon bang kalidad ng katiyakan ang iyong mga produkto?
Q: Oo nga, kung may problema sa quality sa products namin, kami ay mabayaran ang customer hanggang sa sila ay nasiyahan.
Mga Kaugnay na Produkto
Mga Pinakabagong Blog
Common Alloys of Reefer Truck Used PE Coated Aluminum Coil
Discover common alloys of reefer truck used PE coated aluminum coil, kasama na ang 3003, 3004, at 3105. Designed for excellent corrosion resistance, pagiging formable, and long-lasting outdoor performance.
Is Aluminum Conductive? Mga Katangian, Gumagamit ng mga & Benefits Explained
Is aluminum conductive? Discover aluminum's electrical conductivity, key advantages, and why it is widely used in power transmission and industrial applications.
Unlocking Sustainability: The Truth About Aluminum Foil Recycling
Is Aluminum Foil Recyclable? Learn how aluminum foil can be recycled, how to prepare it properly, and why recycling helps reduce waste and save resources.
Coated Aluminum Foil for Packaging Applications | Strong & Reliable
High-quality coated aluminum foil for packaging applications, offering excellent barrier protection, tibay ng katawan, and consistent performance.
