3003 aluminum sheet vs 1060 aluminum sheet

141 Views 2024-05-21 09:49:37

3003 aluminum sheet and 1060 aluminum sheet are both common aluminum sheets. They can replace each other in some usage scenarios, but they have large deviations in chemical composition, mechanical properties and price. Therefore, you need to understand your usage scenarios before ordering aluminum sheets. And the difference between 3003 aluminum sheet and 1060 aluminum sheet.

3003 aluminum sheet introduction

3003 aluminum sheet is one of the most common alloy aluminum sheets. It is a representative product of the 3000 series (Al-Mn) aluminum plate. It is a widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum).

It cannot be strengthened by heat treatment, so cold working methods are used to improve its mechanical properties: it has high plasticity in the annealed state, good plasticity during semi-cold work hardening, low plasticity during cold work hardening, good corrosion resistance, good weldability, and can be cut. Poor performance.

3003 aluminum sheet packaged

3003 aluminum sheet packaged

It is mainly used for low-load parts that require high plasticity and good weldability and work in liquid or gas media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.

Chemical composition

In terms of chemical composition, the main elements of 3003 aluminum plate include aluminum (Al) and manganese (Mn), of which the aluminum content is greater than 98% and the manganese content is between 1-1.5%. 3003 aluminum sheet also contains a small amount of copper (Cu) and other impurity elements. The content and proportion of these alloy elements play an important role in the hardness, strength, corrosion resistance and other properties of 3003 aluminum plates.

Mechanical standards

Mechanical standards are an important indicator for measuring material performance and an important basis for evaluating the quality of 3003 aluminum sheets. In terms of mechanical standards, the hardness, strength, ductility and corrosion resistance of 3003 aluminum plates are all key indicators.

The hardness of 3003 aluminum sheet is mainly reflected in its tensile strength and yield strength. According to international standards, the tensile strength of 3003 aluminum sheet is between 110-205MPa and the yield strength is between 40-150MPa. This shows that 3003 aluminum plate has a certain hardness and strength to a certain extent and can meet the needs of different fields.

The ductility of 3003 aluminum plate is also one of its important mechanical standards. The elongation rate of 3003 aluminum sheet is usually above 10%, which means that it has good sheet forming performance and is suitable for various stamping and forming processes.

The corrosion resistance of 3003 aluminum sheet is also one of the important indicators in its mechanical standards. Because it contains manganese and other alloying elements, 3003 aluminum plates have good corrosion resistance and can be used in humid and corrosive environments for a long time without being damaged.

Introduction to 1060 aluminum sheet

1060 aluminum sheet and strip, containing 99.6% aluminum, is also called pure aluminum plate. It is a commonly used series in the aluminum sheet and strip family. The advantages of this series of aluminum plates: the most commonly used series, the production process is relatively simple, the technology is relatively mature, and the price has a huge advantage compared to other high-end alloy aluminum plates. It has good elongation and tensile strength, and can fully meet conventional processing requirements (stamping, stretching) and high formability.

1060 aluminum sheet is industrial pure aluminum with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but low strength, cannot be strengthened by heat treatment, and has poor machinability; it can be gas welded, hydrogen atom welded and contact welded, but is not easy to braze; Easy to withstand various pressure processing, stretching and bending.

3003 aluminum sheet vs 1060 aluminum sheet

3003 aluminum sheet vs 1060 aluminum sheet

1060 aluminum plate is widely used in products that do not require high strength. Products are commonly used in signboards, billboards, building exterior decorations, bus bodies, high-rise building and factory wall decorations, kitchen sinks, lamp holders, fan blades, electronic parts, chemical instruments, thin plate processing parts, deep drawing or spinning concave parts. Shaped utensils, welded parts, heat exchangers, clock surfaces and disks, nameplates, kitchenware, decorations, reflective equipment, etc.

3003 aluminum sheet vs 1060 aluminum sheet

Alloy differences

Al(%) Si (%) Cu (%) Mg(%) Zn (%) Mn(%) Ti(%) V (%) Fe(%)
99.60 0.25 0.05 0.03 0.05 0.03 0.03 0.05 0.35
96.8-99.0 0.60 0.05-0.20 0-0.05 0.10 1.00-1.50 0.70

Differences in mechanical properties

Alloy Tensile strength Yield Strength
1060 110-136 ≥35
3003 120-160 ≥85

Differences in use

Since 1060 aluminum plate has good electrical conductivity, it is usually used in electronic devices, batteries, capacitors and other fields. Due to its higher strength and corrosion resistance, 3003 aluminum sheet is suitable for manufacturing body panels, fuel tanks, ships and other fields with high strength requirements.

1060 aluminum sheet application

  • Electronic products: used to manufacture electronic components, electrical casings, LED heat sinks, etc., taking advantage of its good electrical and thermal conductivity properties.
  • Building materials: used to make decorative panels, curtain walls, roofing materials, etc., with good corrosion resistance and aesthetics.
  • Advertising signs: used to make signs and billboards, thanks to its good formability and surface treatment capabilities.
  • Household appliances: such as kitchen sinks, lampshades, fan blades, etc., taking advantage of their ease of processing and corrosion resistance.
  • Chemical equipment: used to make certain parts of chemical equipment to take advantage of its chemical stability.
Applications of 1060 aluminum sheet

Applications of 1060 aluminum sheet

3003 aluminum plate application

  • Chemical equipment and containers: In the pharmaceutical and food industries, 3003 aluminum plates are used to make containers and packaging materials. Because they will not react with chemical substances, they ensure the safety and quality of the products.
  • Aerospace: Leveraging its lightweight, corrosion-resistant and ability to withstand extreme conditions, 3003 aluminum sheets are used to manufacture aerospace components and equipment, helping to improve aircraft performance and fuel efficiency.
  • Automobile manufacturing: In vehicles such as cars, trains, trams, etc., 3003 aluminum sheets are used as body panels, compartment panels, roof panels, etc. to reduce weight and improve fuel economy.
  • Electronic field: used in electronic product casings, radiators, etc., using its conductive properties and heat dissipation capabilities to protect electronic components.
  • Building materials: Used for building exterior siding, roof panels, ceilings, etc., both as decorative materials and to take advantage of its light weight and weather resistance.
  • Transportation: Not limited to cars, but also body parts for trains, trams, etc. to achieve lightweight design.


Related Applications

Aluminum honeycomb core

Aluminum foil for honeycomb core

Aluminum foil for honeycomb core is also called honeycomb aluminum foil, which is the main raw material for making honeycomb core.

Can lid materials

Can lid material

Can lid material is usually made of 5182 aluminum alloy. This material has good formability, strength and sealing, and is suitable for making can lids. In addition, 3104/3004 aluminum alloy is also used as can lid material

Can body materials

Can body materials

The can body materials is a lightweight and environmentally friendly packaging material, usually used to fill beverages, beer and other liquid foods.

Get in touch with us

Address

No.52, Dongming Road,
Zhengzhou, Henan, China

Call Us

Tel:+86-371-66302886
Whatsapp:+8618137782032

Huawei Certificates

Trusted Aluminum Sheet/Coil, Aluminum Foil, Aluminum Strip, Aluminum Circle Manufacturer
We provide high quality products only


Whatsapp/Wechat
+8618137782032
whatsapp wechat

[email protected]