PTP pharmaceutical aluminum foil
1406 Views 2024-06-24 09:25:19
Introduction to PTP pharmaceutical aluminum foil
PTP pharmaceutical aluminum foil structure: protective layer (OP), outer printing layer, aluminum foil substrate (AL) (Huawei product), inner printing layer, adhesive (VC), etc.
At present, it is becoming more and more common to use blister packaging for health food and pharmaceutical tablets and capsules. Aluminum-plastic blisters are also called blister packaging, referred to as PTP (Press Through Packaging). The aluminum foil used in blister packaging is a sealing material densely attached to the hard sheet of pharmaceutical plastic polyvinyl chloride (PVC), so it is also called cover material. Almost all products in modern packaging that require opaque or high-barrier composite materials use aluminum foil (Huawei product) as a barrier layer. This is because aluminum foil has a highly dense metal crystal structure that can block any gas, so it is widely used.
PTP pharmaceutical aluminum foil
It is expected that the packaging used for pharmaceutical blister materials will account for about 60% to 70% of the tablet and capsule packaging of pharmaceuticals in the future, and it is one of the pharmaceutical packaging materials with good development prospects.
Executable standards: national standard, American standard, European standard, Russian standard, Japanese standard, etc.
PTP pharmaceutical aluminum foil specifications
- Alloy: 8011 aluminum foil
- Product status: O, H14, H16, H18
- Thickness: 0.012-0.5mm
- Width: 100-1700mm
- Application areas: Capsule medicine board, candy blister packaging board, tablet medicine board, etc.
Chemical composition of PTP pharmaceutical aluminum foil
| CHEMICAL COMPOSITION (%) | ||||||||||
| Limits of Alloy Elements | AL | |||||||||
| Alloy | Fe | Si | Cu | Mg | Zn | Mn | Ti | Other | ||
| Ind. | Total | |||||||||
| A8111 | ≤0.70 | ≤0.06 | ≤0.05 | ≤0.10 | ≤0.05 | ≤0.06 | ≤0.03 | ≥99.11 | ||
PTP pharmaceutical aluminum foil technical parameters
| Typical alloys | Temper | Thickness（mm） | Width（mm） | Length（mm） | Typical products |
| 8011 | O,H14,H16,H18 | 0.012-0.5 | 100-1700 | C | Capsule plates, candy blister packaging plates, tablet plates, etc. |
Performance of PTP pharmaceutical aluminum foil substrate(8011 H18 aluminum foil)
High cleanliness, non-toxic, odorless, and safe for hygiene.
Excellent mechanical properties, high resistance to bursting, and strong puncture and tear resistance.
Clean surface without spots, uniform color, smooth and without hollows.
Easy to transport, good moisture resistance, and prevents oxidation.
PTP pharmaceutical aluminum foil structure
Why is PTP pharmaceutical aluminum foil so popular?
The reason why PTP pharmaceutical aluminum foil is so popular in the field of pharmaceutical packaging is mainly due to its unique advantages that ensure the quality, safety and convenience of drugs. Here are a few key reasons:
- Excellent barrier performance: PTP aluminum foil has excellent oxygen barrier, light-proof and moisture-proof properties, which can effectively protect drugs from external environmental influences such as oxygen, moisture and light, thereby extending the shelf life of drugs and maintaining their chemical stability.
- Easy to use: The blister design on the aluminum foil allows users to take out the drugs with just a light press, which is convenient and fast, and reduces the risk of contamination of drugs.
- High safety: The non-toxic and odorless properties ensure the safety of drugs, will not cause chemical reactions or contamination to drugs, and the packaging is highly sealed, which can effectively prevent drugs from being contaminated by microorganisms during transportation and storage.
- Good mechanical properties: PTP pharmaceutical aluminum foil has good mechanical strength and can withstand mechanical stress during packaging and transportation. At the same time, it shows good heat sealing strength and cup convexity during heat sealing, ensuring the integrity and durability of the packaging.
- Lightweight and portable: Compared with traditional glass or plastic bottle packaging, aluminum foil blister packaging is lighter and easier to carry, especially suitable for travelers or people who need to carry medicine with them.
- Visual appeal: The surface of aluminum foil is suitable for printing, and can print clear instructions, batch numbers, expiration dates and other information, as well as attractive patterns and brand logos, which helps to enhance the brand image and recognition of drugs.
- Standardized production: With the development of automated packaging technology, PTP aluminum foil is very suitable for high-speed automated packaging lines, improving production efficiency and consistency of packaging quality.
- Environmentally friendly and sustainable: Although aluminum resources are precious, aluminum foil packaging can be recycled, which conforms to modern environmental protection concepts and reduces the impact of packaging waste on the environment.
In summary, PTP pharmaceutical aluminum foil has become one of the indispensable materials in the field of pharmaceutical packaging due to its comprehensive advantages in protecting drugs, convenient use, safety and reliability, and promoting marketing.
8011 aluminum foil
Huawei Aluminum PTP Aluminum Foil for Pharmaceutical Packaging
Huawei Aluminum is a manufacturer of raw materials for aluminum foil for PTP pharmaceutical packaging (it does not do gluing, laminating, or finished products). The company’s 8011 aluminum foil, 1060 aluminum foil, etc. have the advantages of high cupping value, high heat sealing strength, no holes, and good sealing. It is a supplier of aluminum foil raw materials for various pharmaceutical packaging companies at home and abroad.
PTP pharmaceutical aluminum foil alloy: 8011-H18 aluminum foil, 8011-O aluminum foil, etc., with a thickness of 0.016-0.04mm;
More pharmaceutical aluminum foil please visit: https://hwpfp.com/
