1100 Aluminum Srtip

160 Views 2023-12-14 03:30:18

Alloy 1100
Temper O,H12,H14,H16,H18,H22,H24,H26
Thickness 0.1-6mm, Customize
Width ≥10mm, Customize
Surface Mill Finish, Polished, Brushed, Checkered, Embossed, Colored, Diamond,etc.
Supplier Huawei Aluminum
Currency USD, EUR, RMB
Whatsapp E-mail Contact

1100 aluminum strips product introduction

Aluminum alloy 1100 strip is a 1000 series pure aluminum strip, composed of 99.00% a

luminum and very small amounts of other elements.

1100 aluminum strips

1100 aluminum strips

1100 aluminum strips have excellent corrosion resistance, high thermal conductivity and good processability. Alloy 1100 aluminum strip is not heat treatable and cannot be strengthened by heat treatment. The mechanical properties of the aluminum strip can be improved by cold working.

1100 aluminum strips specification

Huawei Aluminum has more than twenty years of experience in aluminum foil production and can produce according to customer needs.

Alloy 1xxx (1100)
Temper HO,H12,H14,H16,H18,H22,H24,H26
Thickness 0.1-5.0mm
Width ≥10mm
Length Customized on demand
ID 152/300/405/505mm
Production Standards ASTM-B-209M, BS EN 485-2, BS EN 573 -3, GB/T3880-2008
Moq 3 tons
Surface polished, mirror, pattern
Delivery time within 30 days
Place of Origin Zhengzhou, China
Payment method T/T, L/C, etc.

1000 series aluminum strip slloy products

1050 aluminum strip

1060 aluminum strip

1070 aluminum strip

1100 aluminum strip

1235 aluminum strip

1350 aluminum strip

1100 aluminium strip chemical properties

Alloy Designation Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V Others
Grade Chemical Each Total
1100 AI 99.0 0.95 0.05-0.20 0.05 0.10 0.05 0.05

1100 aluminium strip mechanical properties

Thickness(mm) Thickness(inch) Tensile strength(Mpa) Yield strength(Mpa) Elongtion(%)
0.2-0.3mm 0.008-0.012 110-145 95 1
0.3-0.5mm 0.012  -0.02 110-145 95 2
0.5-1.5mm 0.02-0.06 110-145 95 3
1.5-5.0mm 0.06-0.16 110-145 95 5

1xxx aluminum alloy strip performance comparison

1100 is an aluminum strip with higher purity. There are also 1050, 1060, 1070, 1235 and other alloys in the pure aluminum series. The purity of these alloys is slightly different, and their performance is also different.

Alloy Temper Thickness(mm) Tensile strength(Mpa) Elongation(%)
1050 O 0.2-6.0 60-100 >15
H24 >95 >2
1060 O 0.2-6.0 55-95 >15
H24 >85 >2
1070 O 0.2-6.0 60-100 >15
H24 >95 >2

1100 aluminum strip physical properties:

Density: 2.7 g/cm³
Melting point: 660-685 degrees Celsius
Resistivity:28-30 x 10^-6 Q-m
Thermal conductivity: 200 W/m·K
Modulus of elasticity: 70 GPa
Hardness:HB 60-110
Tensile strength: ≥110-136 MPa
Elongation: ≥8-16%

Aluminum alloy strip specification

Aluminum strip is a common metal material with the characteristics of light weight, corrosion resistance and good conductivity. It is widely used in aviation, automobile, construction, electronics and other fields. Aluminum strips of different specifications and models are suitable for different occasions. In addition to the 1000 series pure alloy aluminum strips, there are also other specifications of alloy aluminum strips for customers to choose from.

3003 aluminum strip

3003 aluminum strip is an aluminum alloy strip with high manganese content. It has good corrosion resistance and formability and is suitable for making oil.
Box, oil pipe, fuel tank, etc. Its specifications are thickness 0.2-3.0mm and width 20-1650mm.

3003 aluminum strip

3003 aluminum strip

5052 aluminum strip

5052 aluminum strip is an aluminum alloy strip with high magnesium content. It has good corrosion resistance and strength and is suitable for making ships,
Cars, airplanes, etc. Its specifications are thickness 0.2-3.0mm and width 20-1650mm.

6061 aluminum strip

6061 aluminum strip is an aluminum alloy strip with high magnesium and silicon content. It has good strength and corrosion resistance and is suitable for manufacturing aircraft.
Spacecraft, automobile parts, etc. Its specifications are thickness 0.2-3.0mm and width 20-1650mm.

8011 aluminum strip

8011 aluminum strip is an aluminum-manganese alloy strip with good corrosion resistance and formability. It is suitable for making food packaging, pharmaceutical packaging, etc. Its specifications are thickness 0.2-0.3mm and width 200-1600mm.

Different specifications and models are suitable for different occasions. Choosing the right aluminum strip can improve productivity.
product quality and performance. When using aluminum strips, care needs to be taken to protect its surface and avoid scratches and corrosion to extend its service life.

Aluminum strip 1100 supplier

1100 aluminum strip belongs to the pure aluminum series of aluminum strip products. Warwick Aluminum can provide 1100 aluminum strip, which can be cut into 1100 aluminum strips of various widths. It provides 1100 H14, 1100H24 aluminum strip, 1100 soft aluminum strip and other products all year round. The width we supply can be cut according to the order requirements. The width tolerance is within 0.1mm. The inner diameter can be 75 150 300 500mm. We have 1100 aluminum strips of various thicknesses in stock all year round.

Casting production process and its introduction

The purpose of melting and casting is to produce alloys with satisfactory composition and high purity of melt, so as to create favorable conditions for casting alloys of various shapes.

Melting and casting process steps: batching --- feeding --- melting --- stirring after melting, slag removal --- pre-analysis sampling --- adding alloy to adjust the composition, stirring --- refining --- static Setting——Guide furnace casting.

Hot rolling production process and its introduction

  • 1. Hot rolling generally refers to rolling above the metal recrystallization temperature;
  • 2. During the hot rolling process, the metal has both hardening and softening processes. Due to the influence of deformation speed, as long as the recovery and recrystallization process is too late, there will be a certain work hardening;
  • 3. The recrystallization of the metal after hot rolling is incomplete, that is, the coexistence of recrystallized structure and deformed structure;
  • 4. Hot rolling can improve the processing performance of metals and alloys, reduce or eliminate casting defects.
    • Hot rolling equipment

      Casting and rolling process

      Casting and rolling process: liquid metal, front box (liquid level control), casting and rolling machine (lubrication system, cooling water), shearing machine, coiling machine.

      • 1. The casting and rolling temperature is generally between 680°C and 700°C. The lower the better, the stable casting and rolling line usually stops once a month or more to re-stand. During the production process, it is necessary to strictly control the liquid level of the front tank to prevent low liquid level;
      • 2. Lubrication uses C powder with incomplete combustion of gas for lubrication, which is also one of the reasons for the dirty surface of casting and rolling materials;
      • 3. The production speed is generally between 1.5m/min-2.5m/min;
      • 4. The surface quality of products produced by casting and rolling is generally relatively low, and generally cannot meet products with special physical and chemical performance requirements.
        • Cold rolling production process

          • 1. Cold rolling refers to the rolling production method below the recrystallization temperature;
          • 2. There will be no dynamic recrystallization during the rolling process, and the temperature will rise to the recovery temperature at most, and the cold rolling will appear in a work hardening state, and the work hardening rate will be large;
          • 3. The cold-rolled sheet and strip have high dimensional accuracy, good surface quality, uniform structure and performance, and products in various states can be obtained with heat treatment;
          • 4. Cold rolling can roll out thin strips, but at the same time, it has the disadvantages of high energy consumption for deformation and many processing passes.
            • Casting rolling

              Introduction to finishing production process

              • 1. Finishing is a processing method to make the cold-rolled sheet meet the customer's requirements, or to facilitate the subsequent processing of the product;
              • 2. The finishing equipment can correct the defects produced in the hot rolling and cold rolling production process, such as cracked edge, oily, poor plate shape, residual stress, etc. It needs to ensure that no other defects are brought into the production process;
              • 3. There are various finishing equipments, mainly including cross-cutting, slitting, stretching and straightening, annealing furnace, slitter, etc.

Aluminum alloy has the characteristics of low density, good mechanical properties, good processing performance, non-toxic, easy to recycle, excellent electrical conductivity, heat transfer and corrosion resistance, so it has a wide range of applications.

Aerospace: used to make aircraft skins, fuselage frames, girders, rotors, propellers, fuel tanks, wall panels and landing gear struts, as well as rocket forging rings, spacecraft wall panels, etc.

Aluminum alloy used for aerospace

Aluminum alloy used for aerospace

Transportation: used for car body structure materials of automobiles, subway vehicles, railway passenger cars, high-speed passenger cars, doors and windows, shelves, automotive engine parts, air conditioners, radiators, body panels, wheels and ship materials.

Traffic application

Traffic application

Packaging: All-aluminum pop cans are mainly used as metal packaging materials in the form of thin plates and foils, and are made into cans, lids, bottles, barrels, and packaging foils. Widely used in the packaging of beverages, food, cosmetics, medicines, cigarettes, industrial products, medicines, etc.

Packaging application

Packaging application

Printing: Mainly used to make PS plates, aluminum-based PS plates are a new type of material in the printing industry, used for automatic plate making and printing.

PS printing

PS printing

Architectural decoration: aluminum alloy is widely used in building structures, doors and windows, suspended ceilings, decorative surfaces, etc. due to its good corrosion resistance, sufficient strength, excellent process performance and welding performance.

Aluminum alloy construction application

Aluminum alloy construction application

Electronic products: computers, mobile phones, refrigerator shells, radiators, etc.

Electronic product application

Electronic product application

Kitchen supplies: aluminum pots, aluminum basins, rice cooker liners, household aluminum foil, etc.

Kitchen application

Kitchen application

Packaging Of Aluminum Sheet/Coil

Every detail of packaging is where we pursue perfect service. Our packaging process as a whole is as follows:

Lamination: clear film, blue film, micro-mucosal, high-mucosal, laser cutting film (2 brands, Novacell and Polyphem);

Protection: paper corner protectors, anti-pressure pads;

drying: desiccant;

Tray: fumigated harmless wooden tray, reusable iron tray;

Packing: Tic-tac-toe steel belt, or PVC packing belt;

Material Quality: Completely free from defects such as white rust, oil spots, rolling marks, edge damage, bends, dents, holes, break lines, scratches, etc., no coil set.

Port: Qingdao or other ports in China.

Lead time: 15-45 days.

What is 1060 pure aluminum sheet

Aluminum sheet/plate packaging process

What is 1060 pure aluminum sheet

Aluminum coil packaging process

F: Are you a manufacturer or a trader?

Q: We are a manufacturer, our factory is at No.3 Weier Road, Industrial Zone, Gongyi, Henan, China.

F: What is the MOQ for ordering the product?

Q: Our MOQ is 5 tons, and some special products will have a minimum order quantity of 1 or 2 tons.

F: How long is your lead time?

Q: Generally our lead time is about 30 days.

F: Do your products have quality assurance?

Q: Yes, if there is a quality problem with our products, we will compensate the customer until they are satisfied.

Latest Blogs

Aluminum Melting Temp

Aluminum Melting Temp

Are you in the business of aluminum melting temp? If so, understanding the optimal temperature for this process is crucial to achieving the best results.

gauge measurement

What is the meaning of GAUGE in the aluminum sheet?

In the context of aluminum sheets, the term "gauge" refers to the thickness of the steel sheet. It is a measurement of the sheet metal thickness and is usually expressed in terms of a numerical value.

What are the information factors in using aluminum sheets?

What are the information factors in using aluminum sheets?

Aluminum sheets are broadly used in engineering decoration, home decoration, conversation electronics, transportation centers, thermal insulation and anti-corrosion, fine decoration, automobile production and different fields.

1060-H24 aluminum sheet

1060-H24 Aluminum Sheet Usage

With the development of modern industry, aluminum sheets are increasingly used in industry. 1060-H24 aluminum sheet is widely used in various fields due to its excellent physical and chemical properties.

Get in touch with us


No.52, Dongming Road,
Zhengzhou, Henan, China

Call Us


Huawei Certificates

Trusted Aluminum Sheet/Coil, Aluminum Foil, Aluminum Strip, Aluminum Circle Manufacturer
We provide high quality products only

whatsapp wechat

[email protected]