1050 Aluminum Strip

139 Views 2023-12-18 08:01:37

Alloy 1050
Temper F,O,H12,H14,H16,H18,H22,H24,H26
Thickness 0.1-6mm, Customize
Width ≥10mm, Customize
Surface Mill Finish, Polished, Brushed, Checkered, Embossed, Colored, Diamond,etc.
Supplier Huawei Aluminum
Currency USD, EUR, RMB
Whatsapp E-mail Contact

What is 1050 grade aluminum strip?

1050 aluminum strip is a pure aluminum strip with an aluminum content of up to 99.5%. It is a widely used alloy. Aluminum strip 1050 has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity. 1050 aluminum strip also has good corrosion resistance in the atmosphere, fresh water and sea water environments. It is suitable for manufacturing parts that require good formability, corrosion resistance, weldability, or low strength, such as aluminum foil, aluminum packages, aluminum tubes, wires, cables, and daily necessities.

1050 aluminum strip

1050 aluminum strip

1050 aluminum strip chemical properties

1050 Aluminum Strip Alloy Element Content(%)
Alloy Mg Zn Mn Ti V Fe Single Al
Content 0.05 0.05 0.05 0.03 0.05 0.40 0.03 99.5

Aluminum strip 1050 production specifications

Aluminum Purity 99.95%
Temper F, O, H14, H16,H18,H24
Thickness 0.1mm~5mm
Width 10mm~1600mm
Quantity tolerance ±2%
ID 152.4, 200, 305, 405 and 505mm, costmized
Surface treatment polished surface
Performance smooth surface, no burrs, chamfered on both sides, high conductivity
Sample Provide aluminum strip samples
Packing paper + plastic film + woven bag + paper angel beads

1050 aluminum strip replaceability

Can 1060 aluminum strip be used instead of 1050? 1050 aluminum strip contains more than 99.5% aluminum and is one of the industrial pure aluminum. 1050 aluminum strip is a product in the pure aluminum plate series. It has similar chemical composition and mechanical properties to the 1060 series products. It is basically replaced by 1060 aluminum plate and strip in applications.

1050 aluminum strip product

1050 aluminum strip product

Aluminum strip 1050 name definition

The last two Arabic numerals of the 1050 series are 50. According to the international brand naming principles, the aluminum content must reach more than 99.5% to be a qualified product. my country’s aluminum alloy technical standards (GB/T3880-2006) also clearly stipulates that the aluminum content of 1050 reaches 99.5%. Since it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is the most commonly used series in conventional industries.

1050 aluminum strip mechanical properties

Product Temper Tensile Strength(Mpa) The Yield Strength(Mpa) Elongation(%) Hardness(HV)
1050 aluminum strip 1050 F 60-100 ≥23 ≥20 20-30
1050 O 60-100 ≥23 ≥20 20-30
1050 H18 125-200 ≥85 ≥2 50-65
1050 H22 80-120 ≥60 ≥12 30-40
1050 H24 95-135 ≥70 ≥6 40-55
1050 H26 110-155 ≥75 ≥4 40-55

Characteristics of 1050 aluminium strip

1050 aluminum strip has good processability: 1050 aluminum alloy has excellent processability and is suitable for various forming processes, such as stamping, drawing, deep drawing, etc. It can be processed into products of different shapes in a variety of ways.

1050 aluminum strip has excellent electrical conductivity: Due to its high aluminum content, 1050 aluminum alloy has good electrical conductivity, making it useful in some applications that require conductive properties, such as electronic equipment and wires.

1050 aluminium strip has good corrosion resistance: 1050 aluminum alloy has good corrosion resistance in general environments. However, due to its higher purity, it may not perform as well in certain corrosive environments as some aluminum alloys containing alloying elements.

1050 aluminium strip has low strength: The strength of 1050 aluminum alloy is relatively low, so it is usually used in applications that do not require high strength, such as some occasions where lightweight materials are required.

1050 aluminium strip has good weldability: 1050 aluminum alloy has good weldability for various common welding methods, such as argon arc welding, resistance welding, etc.

1050 aluminum series product

1050 aluminum circle disc product

1050 aluminum foil product

1050 aluminum sheet product

1050 aluminum coil product

1050 aluminum strip density

The density of 1050 aluminum alloy at room temperature is approximately 2.70 g/cm³. Aluminum strip 1050 density may vary slightly based on specific alloy composition, tempering and other factors. The values given are general approximations for 1050 aluminum alloy.

Casting production process and its introduction

The purpose of melting and casting is to produce alloys with satisfactory composition and high purity of melt, so as to create favorable conditions for casting alloys of various shapes.

Melting and casting process steps: batching --- feeding --- melting --- stirring after melting, slag removal --- pre-analysis sampling --- adding alloy to adjust the composition, stirring --- refining --- static Setting——Guide furnace casting.

Hot rolling production process and its introduction

  • 1. Hot rolling generally refers to rolling above the metal recrystallization temperature;
  • 2. During the hot rolling process, the metal has both hardening and softening processes. Due to the influence of deformation speed, as long as the recovery and recrystallization process is too late, there will be a certain work hardening;
  • 3. The recrystallization of the metal after hot rolling is incomplete, that is, the coexistence of recrystallized structure and deformed structure;
  • 4. Hot rolling can improve the processing performance of metals and alloys, reduce or eliminate casting defects.
    • Hot rolling equipment

      Casting and rolling process

      Casting and rolling process: liquid metal, front box (liquid level control), casting and rolling machine (lubrication system, cooling water), shearing machine, coiling machine.

      • 1. The casting and rolling temperature is generally between 680°C and 700°C. The lower the better, the stable casting and rolling line usually stops once a month or more to re-stand. During the production process, it is necessary to strictly control the liquid level of the front tank to prevent low liquid level;
      • 2. Lubrication uses C powder with incomplete combustion of gas for lubrication, which is also one of the reasons for the dirty surface of casting and rolling materials;
      • 3. The production speed is generally between 1.5m/min-2.5m/min;
      • 4. The surface quality of products produced by casting and rolling is generally relatively low, and generally cannot meet products with special physical and chemical performance requirements.
        • Cold rolling production process

          • 1. Cold rolling refers to the rolling production method below the recrystallization temperature;
          • 2. There will be no dynamic recrystallization during the rolling process, and the temperature will rise to the recovery temperature at most, and the cold rolling will appear in a work hardening state, and the work hardening rate will be large;
          • 3. The cold-rolled sheet and strip have high dimensional accuracy, good surface quality, uniform structure and performance, and products in various states can be obtained with heat treatment;
          • 4. Cold rolling can roll out thin strips, but at the same time, it has the disadvantages of high energy consumption for deformation and many processing passes.
            • Casting rolling

              Introduction to finishing production process

              • 1. Finishing is a processing method to make the cold-rolled sheet meet the customer's requirements, or to facilitate the subsequent processing of the product;
              • 2. The finishing equipment can correct the defects produced in the hot rolling and cold rolling production process, such as cracked edge, oily, poor plate shape, residual stress, etc. It needs to ensure that no other defects are brought into the production process;
              • 3. There are various finishing equipments, mainly including cross-cutting, slitting, stretching and straightening, annealing furnace, slitter, etc.

Aluminum alloy has the characteristics of low density, good mechanical properties, good processing performance, non-toxic, easy to recycle, excellent electrical conductivity, heat transfer and corrosion resistance, so it has a wide range of applications.

Aerospace: used to make aircraft skins, fuselage frames, girders, rotors, propellers, fuel tanks, wall panels and landing gear struts, as well as rocket forging rings, spacecraft wall panels, etc.

Aluminum alloy used for aerospace

Aluminum alloy used for aerospace

Transportation: used for car body structure materials of automobiles, subway vehicles, railway passenger cars, high-speed passenger cars, doors and windows, shelves, automotive engine parts, air conditioners, radiators, body panels, wheels and ship materials.

Traffic application

Traffic application

Packaging: All-aluminum pop cans are mainly used as metal packaging materials in the form of thin plates and foils, and are made into cans, lids, bottles, barrels, and packaging foils. Widely used in the packaging of beverages, food, cosmetics, medicines, cigarettes, industrial products, medicines, etc.

Packaging application

Packaging application

Printing: Mainly used to make PS plates, aluminum-based PS plates are a new type of material in the printing industry, used for automatic plate making and printing.

PS printing

PS printing

Architectural decoration: aluminum alloy is widely used in building structures, doors and windows, suspended ceilings, decorative surfaces, etc. due to its good corrosion resistance, sufficient strength, excellent process performance and welding performance.

Aluminum alloy construction application

Aluminum alloy construction application

Electronic products: computers, mobile phones, refrigerator shells, radiators, etc.

Electronic product application

Electronic product application

Kitchen supplies: aluminum pots, aluminum basins, rice cooker liners, household aluminum foil, etc.

Kitchen application

Kitchen application

Packaging Of Aluminum Sheet/Coil

Every detail of packaging is where we pursue perfect service. Our packaging process as a whole is as follows:

Lamination: clear film, blue film, micro-mucosal, high-mucosal, laser cutting film (2 brands, Novacell and Polyphem);

Protection: paper corner protectors, anti-pressure pads;

drying: desiccant;

Tray: fumigated harmless wooden tray, reusable iron tray;

Packing: Tic-tac-toe steel belt, or PVC packing belt;

Material Quality: Completely free from defects such as white rust, oil spots, rolling marks, edge damage, bends, dents, holes, break lines, scratches, etc., no coil set.

Port: Qingdao or other ports in China.

Lead time: 15-45 days.

What is 1060 pure aluminum sheet

Aluminum sheet/plate packaging process

What is 1060 pure aluminum sheet

Aluminum coil packaging process

F: Are you a manufacturer or a trader?

Q: We are a manufacturer, our factory is at No.3 Weier Road, Industrial Zone, Gongyi, Henan, China.

F: What is the MOQ for ordering the product?

Q: Our MOQ is 5 tons, and some special products will have a minimum order quantity of 1 or 2 tons.

F: How long is your lead time?

Q: Generally our lead time is about 30 days.

F: Do your products have quality assurance?

Q: Yes, if there is a quality problem with our products, we will compensate the customer until they are satisfied.



Latest Blogs

Aluminum Melting Temp

Aluminum Melting Temp

Are you in the business of aluminum melting temp? If so, understanding the optimal temperature for this process is crucial to achieving the best results.

gauge measurement

What is the meaning of GAUGE in the aluminum sheet?

In the context of aluminum sheets, the term "gauge" refers to the thickness of the steel sheet. It is a measurement of the sheet metal thickness and is usually expressed in terms of a numerical value.

What are the information factors in using aluminum sheets?

What are the information factors in using aluminum sheets?

Aluminum sheets are broadly used in engineering decoration, home decoration, conversation electronics, transportation centers, thermal insulation and anti-corrosion, fine decoration, automobile production and different fields.

1060-H24 aluminum sheet

1060-H24 Aluminum Sheet Usage

With the development of modern industry, aluminum sheets are increasingly used in industry. 1060-H24 aluminum sheet is widely used in various fields due to its excellent physical and chemical properties.


Get in touch with us

Address

No.52, Dongming Road,
Zhengzhou, Henan, China

Call Us

Tel:+86-371-66302886
Whatsapp:+8618137782032

Huawei Certificates

Trusted Aluminum Sheet/Coil, Aluminum Foil, Aluminum Strip, Aluminum Circle Manufacturer
We provide high quality products only


Whatsapp/Wechat
+8618137782032
whatsapp wechat

[email protected]