3003 folha de alumínio vs. 1060 folha de alumínio

141 Visualizações 2024-05-21 09:49:37

3003 folha de alumínio e 1060 folha de alumínio são folhas de alumínio comuns. Eles podem substituir um ao outro em alguns cenários de uso, mas eles têm grandes desvios na composição química, propriedades mecânicas e preço. Portanto, you need to understand your usage scenarios before ordering aluminum sheets. And the difference between 3003 folha de alumínio e 1060 folha de alumínio.

3003 introdução de folha de alumínio

3003 folha de alumínio is one of the most common alloy aluminum sheets. É um produto representativo da 3000 Series (Al-Mn) placa de alumínio. It is a widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum).

Não pode ser fortalecido por tratamento térmico, so cold working methods are used to improve its mechanical properties: it has high plasticity in the annealed state, boa plasticidade durante o endurecimento por trabalho semi-frio, baixa plasticidade durante o endurecimento por trabalho a frio, boa resistência à corrosão, boa soldabilidade, and can be cut. Poor performance.

3003 folha de alumínio embalada

3003 folha de alumínio embalada

It is mainly used for low-load parts that require high plasticity and good weldability and work in liquid or gas media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.

Composição química

In terms of chemical composition, the main elements of 3003 aluminum plate include aluminum (al) and manganese (Mn), of which the aluminum content is greater than 98% and the manganese content is between 1-1.5%. 3003 aluminum sheet also contains a small amount of copper (Cu) and other impurity elements. The content and proportion of these alloy elements play an important role in the hardness, força, corrosion resistance and other properties of 3003 placas de alumínio.

Mechanical standards

Mechanical standards are an important indicator for measuring material performance and an important basis for evaluating the quality of 3003 folhas de alumínio. In terms of mechanical standards, the hardness, força, ductility and corrosion resistance of 3003 aluminum plates are all key indicators.

A dureza de 3003 aluminum sheet is mainly reflected in its tensile strength and yield strength. De acordo com padrões internacionais, the tensile strength of 3003 aluminum sheet is between 110-205MPa and the yield strength is between 40-150MPa. This shows that 3003 aluminum plate has a certain hardness and strength to a certain extent and can meet the needs of different fields.

The ductility of 3003 aluminum plate is also one of its important mechanical standards. The elongation rate of 3003 aluminum sheet is usually above 10%, which means that it has good sheet forming performance and is suitable for various stamping and forming processes.

A resistência à corrosão de 3003 aluminum sheet is also one of the important indicators in its mechanical standards. Because it contains manganese and other alloying elements, 3003 aluminum plates have good corrosion resistance and can be used in humid and corrosive environments for a long time without being damaged.

Introdução a 1060 folha de alumínio

1060 aluminum sheet and strip, contendo 99.6% alumínio, is also called pure aluminum plate. It is a commonly used series in the aluminum sheet and strip family. The advantages of this series of aluminum plates: the most commonly used series, the production process is relatively simple, the technology is relatively mature, and the price has a huge advantage compared to other high-end alloy aluminum plates. It has good elongation and tensile strength, e pode atender totalmente aos requisitos de processamento convencionais (estampagem, alongamento) e alta conformabilidade.

1060 folha de alumínio is industrial pure aluminum with high plasticity, resistência à corrosão, condutividade elétrica e condutividade térmica, mas baixa força, não pode ser reforçado por tratamento térmico, e tem baixa usinabilidade; it can be gas welded, hydrogen atom welded and contact welded, but is not easy to braze; Easy to withstand various pressure processing, stretching and bending.

3003 folha de alumínio vs. 1060 folha de alumínio

3003 folha de alumínio vs. 1060 folha de alumínio

1060 aluminum plate is widely used in products that do not require high strength. Products are commonly used in signboards, billboards, building exterior decorations, bus bodies, high-rise building and factory wall decorations, kitchen sinks, lamp holders, fan blades, electronic parts, chemical instruments, peças de processamento de placas finas, deep drawing or spinning concave parts. Shaped utensils, welded parts, trocadores de calor, clock surfaces and disks, placas de identificação, utensílios de cozinha, decorações, equipamento reflexivo, etc.

3003 folha de alumínio vs. 1060 folha de alumínio

Alloy differences

al(%) E (%) Cu (%) mg(%) Zn (%) Mn(%) De(%) V (%) Fé(%)
99.60 0.25 0.05 0.03 0.05 0.03 0.03 0.05 0.35
96.8-99.0 0.60 0.05-0.20 0-0.05 0.10 1.00-1.50 0.70

Differences in mechanical properties

Liga Resistência à tracção Força de Rendimento
1060 110-136 ≥35
3003 120-160 ≥85

Differences in use

Desde 1060 aluminum plate has good electrical conductivity, it is usually used in electronic devices, baterias, capacitors and other fields. Due to its higher strength and corrosion resistance, 3003 aluminum sheet is suitable for manufacturing body panels, tanques de combustível, ships and other fields with high strength requirements.

1060 aplicação de chapa de alumínio

  • Produtos eletrônicos: used to manufacture electronic components, invólucros elétricos, LED heat sinks, etc., taking advantage of its good electrical and thermal conductivity properties.
  • Building materials: used to make decorative panels, paredes de cortina, materiais de cobertura, etc., with good corrosion resistance and aesthetics.
  • Advertising signs: used to make signs and billboards, thanks to its good formability and surface treatment capabilities.
  • Household appliances: such as kitchen sinks, abajures, fan blades, etc., taking advantage of their ease of processing and corrosion resistance.
  • Chemical equipment: used to make certain parts of chemical equipment to take advantage of its chemical stability.
Aplicações de 1060 folha de alumínio

Aplicações de 1060 folha de alumínio

3003 aluminum plate application

  • Chemical equipment and containers: In the pharmaceutical and food industries, 3003 aluminum plates are used to make containers and packaging materials. Because they will not react with chemical substances, they ensure the safety and quality of the products.
  • Aeroespacial: Leveraging its lightweight, corrosion-resistant and ability to withstand extreme conditions, 3003 aluminum sheets are used to manufacture aerospace components and equipment, helping to improve aircraft performance and fuel efficiency.
  • Fabricação de automóveis: In vehicles such as cars, trens, bondes, etc., 3003 aluminum sheets are used as body panels, compartment panels, roof panels, etc. to reduce weight and improve fuel economy.
  • campo eletrônico: used in electronic product casings, radiadores, etc., using its conductive properties and heat dissipation capabilities to protect electronic components.
  • Building materials: Used for building exterior siding, roof panels, tetos, etc., both as decorative materials and to take advantage of its light weight and weather resistance.
  • Transporte: Not limited to cars, but also body parts for trains, bondes, etc. to achieve lightweight design.

Aplicativos Relacionados

Núcleo de favo de mel de alumínio

Folha de alumínio para núcleo de favo de mel

A folha de alumínio para núcleo de favo de mel também é chamada de folha de alumínio de favo de mel, qual é a principal matéria-prima para fazer núcleo de favo de mel.

Pode tampar materiais

Material da tampa da lata

O material da tampa da lata geralmente é feito de 5182 Liga de alumínio. Este material tem boa conformabilidade, resistência e vedação, e é adequado para fazer tampas de latas. Além disso, 3104/3004 liga de alumínio também é usada como material de tampa de lata

Materiais do corpo podem

Materiais do corpo podem

Os materiais do corpo da lata são um material de embalagem leve e ecologicamente correto, geralmente usado para encher bebidas, cerveja e outros alimentos líquidos.

Entre em contato conosco


nº 52, Estrada de Dongming,
Zhengzhou, Henan, China

Ligue para nós


Certificados Huawei

Folha/bobina de alumínio confiável, Folha de Alumínio, Tira de Alumínio, Círculo de Alumínio Fabricante
Nós fornecemos apenas produtos de alta qualidade

Whatsapp conversamos

[email protected]