5086 aluminum sheet – an aluminum alloy with the primary alloy element being magnesium. It is not strengthened by heat treatment, instead becoming stronger due to strain hardening, or cold mechanical working of the material. Since heat treatment doesn’t strongly affect the strength, 5086 can be readily welded and retain most of its mechanical strength. The good weldability and corrosion properties in seawater make 5086 extremely popular for vessel gangways, and boat/yacht hulls. It is considered a sister alloy to 5083 aluminium aluminum sheet with comparable characteristics but slightly less strength.
5000 series aluminum sheet plate is an aluminum alloy plate with magnesium as the main alloy, mainly including 5005 aluminum sheet, 5052 aluminum alloy, 5083 aluminum alloy, 5086 aluminum alloy, 5454 aluminum alloy, 5754 aluminum alloy, etc.
Chemical composition | |
Al | REM |
Si | ≤0.4 |
Fe | ≤0.5 |
Cu | ≤0.1 |
Mn | 0.2-0.7 |
Mg | 3.5-4.5 |
Cr | 0.05-0.25 |
Zn | ≤0.25 |
Ti | ≤0.15 |
Note: EACH≤0.05; TOTAL≤0.15 |
Huawei 5086 aluminum alloy specification | |
Alloy | 5086 |
Temper | O, H111, H112, H116, H321, H12, H14, H16, H18, H32, H34, H36 |
Thickness | 0.8-200mm |
Width | 500-2800mm |
Length | 1000mm-12000mm |
Normal dimension | 1250*2500mm, 1500mm*3000mm, 4×8 aluminum sheet |
Standard | QQ-A-250/7 5086 sheet and plate |
Temper | Room temperature test result | |||
Tension strength/MPa | Yield strength/MPa | Elongation/% | Hardness | |
O/H111 | 240-310 | 100 | 11-17 | 65 |
H112 | 240-250 | 100-105 | 8-12 | 65-69 |
H116/H321 | 275 | 195 | 8-10 | 81 |
H12 | 275-335 | 200 | 3-7 | 81 |
H14 | 300-360 | 240 | 2-4 | 90 |
H16 | 325-385 | 270 | 2 | 98 |
H18 | 345 | 290 | 1 | 104 |
H22/H32 | 275-335 | 185 | 5-10 | 80 |
H24/H34 | 300-360 | 220 | 4-8 | 88 |
H26/H36 | 325-385 | 250 | 3 | 96 |
Corrosion Resistance — 5086 aluminium sheet plate has the basic anti-corrosion ability to air, water (or saltwater), petrochemical and other media. Also, it has strong corrosion resistance in extremely strong industrial and marine atmospheric environments and deep water.
No Low-Temperature Brittleness — Even below 0℃, the strength and plasticity of 5086 aluminium sheet will not decrease with the temperature but will increase, and there is no low-temperature brittleness.
Good Anodized Appearance — 5086 aluminium sheet has good surface anodizing treatment. Also, after its surface being embossed, the pattern of the 5086 aluminium checker plate is clear, smooth and bright.
Typical products: Marine aluminium, automobile, oxidizing material, fuel tank material, coal truck, weldments, etc.
At present, Huawei 5086 aluminium sheet has obtained the certification of CCS, DNV, ABS, BV, LR, from 5 international authoritative organizations, the quality is guaranteed! Huawei 5086 marine grade aluminium sheet has been widely used in the manufacturing of ships’ sides, bottom and outboard, deck, etc., and is deeply favoured by shipbuilding markets in South America, North America, southeast Asia, etc.
In addition, the 5086 aluminium sheet is generally used for applications requiring high corrosion resistance, good weldability, and moderate strength. For example, the weldable parts of ships and automobiles, pressure vessels with a strictly fireproof requirement, refrigeration units, TV towers, loading and testing equipment, transportation equipment, etc.
Sheet specification and size: 5086 aviation aluminum sheet typically has distinct specs and sizes, according to the particular software state of affairs and necessities, select the correct sheet specifications and sizes. It may be tailored and custom designed as wished.
Plank thickness: the thickness of 5086 aluminum sheet is also an essential parameter. In line with the need, select the perfect sheet thickness to satisfy the corresponding electricity, stiffness and weight necessities.
Sheet floor quality: the surface pleasant of the 5086 aluminum sheets also desires to be considered. Take a look at the surface of the sheet for dents, oxidation, scratches and other first-rate troubles to make sure the supply of the sheet.
Plank standards and certification: 5086 H22 aluminum sheet shall meet the relevant requirements and certification necessities, inclusive of AMS (American Society for substances and trying out) general and ASTM (American Society for materials and testing) general. The relevant requirements and certificates need to be checked on the time of purchase.
Sheet providers and brands: pick out respectable, exceptional sheet suppliers and types, to make sure the first-class of 5086 H26 aviation aluminum sheet and provider quality.
Logistics and packaging: while shopping for aluminum 5086 aircraft alloy sheet, you need to be aware of transportation and packaging troubles. Make sure that the board isn’t always damaged all through transportation, and pick out suitable packing materials and methods.
The purpose of melting and casting is to produce alloys with satisfactory composition and high purity of melt, so as to create favorable conditions for casting alloys of various shapes.
Melting and casting process steps: batching --- feeding --- melting --- stirring after melting, slag removal --- pre-analysis sampling --- adding alloy to adjust the composition, stirring --- refining --- static Setting——Guide furnace casting.
Casting and rolling process: liquid metal, front box (liquid level control), casting and rolling machine (lubrication system, cooling water), shearing machine, coiling machine.
Aluminum alloy has the characteristics of low density, good mechanical properties, good processing performance, non-toxic, easy to recycle, excellent electrical conductivity, heat transfer and corrosion resistance, so it has a wide range of applications.
Aerospace: used to make aircraft skins, fuselage frames, girders, rotors, propellers, fuel tanks, wall panels and landing gear struts, as well as rocket forging rings, spacecraft wall panels, etc.
Aluminum alloy used for aerospace
Transportation: used for car body structure materials of automobiles, subway vehicles, railway passenger cars, high-speed passenger cars, doors and windows, shelves, automotive engine parts, air conditioners, radiators, body panels, wheels and ship materials.
Traffic application
Packaging: All-aluminum pop cans are mainly used as metal packaging materials in the form of thin plates and foils, and are made into cans, lids, bottles, barrels, and packaging foils. Widely used in the packaging of beverages, food, cosmetics, medicines, cigarettes, industrial products, medicines, etc.
Packaging application
Printing: Mainly used to make PS plates, aluminum-based PS plates are a new type of material in the printing industry, used for automatic plate making and printing.
PS printing
Architectural decoration: aluminum alloy is widely used in building structures, doors and windows, suspended ceilings, decorative surfaces, etc. due to its good corrosion resistance, sufficient strength, excellent process performance and welding performance.
Aluminum alloy construction application
Electronic products: computers, mobile phones, refrigerator shells, radiators, etc.
Electronic product application
Kitchen supplies: aluminum pots, aluminum basins, rice cooker liners, household aluminum foil, etc.
Kitchen application
Every detail of packaging is where we pursue perfect service. Our packaging process as a whole is as follows:
Lamination: clear film, blue film, micro-mucosal, high-mucosal, laser cutting film (2 brands, Novacell and Polyphem);
Protection: paper corner protectors, anti-pressure pads;
drying: desiccant;
Tray: fumigated harmless wooden tray, reusable iron tray;
Packing: Tic-tac-toe steel belt, or PVC packing belt;
Material Quality: Completely free from defects such as white rust, oil spots, rolling marks, edge damage, bends, dents, holes, break lines, scratches, etc., no coil set.
Port: Qingdao or other ports in China.
Lead time: 15-45 days.
Aluminum sheet/plate packaging process
Aluminum coil packaging process
F: Are you a manufacturer or a trader?
Q: We are a manufacturer, our factory is at No.3 Weier Road, Industrial Zone, Gongyi, Henan, China.
F: What is the MOQ for ordering the product?
Q: Our MOQ is 5 tons, and some special products will have a minimum order quantity of 1 or 2 tons.
F: How long is your lead time?
Q: Generally our lead time is about 30 days.
F: Do your products have quality assurance?
Q: Yes, if there is a quality problem with our products, we will compensate the customer until they are satisfied.
1060 mirror aluminum sheet is an aluminum plate made of 1060 series aluminum alloy with a purity of more than 99.6% as the base material. It is made through special processing technology.
Aluminum foil and tin foil are two common metal sheet materials. They are similar in appearance, both have a silver-white metallic luster, and are often used in daily life to wrap food, perform baking or grilling and other cooking operations.
7075 aluminum alloy is a high-strength aluminum alloy. It belongs to the Al-Zn-Mg-Cu alloy series and is a representative product of the 7000 series aluminum alloy.
Although aluminum and aluminum alloys both use aluminum as the main synthetic element, they have great differences in certain physical and chemical properties.
No.52, Dongming Road,
Zhengzhou, Henan, China
Tel:+86-371-66302886
Whatsapp:+8618137782032