3003 알루미늄 시트 대 1060 알루미늄 시트

3003 알루미늄 시트 및 1060 알루미늄 시트는 모두 일반적인 알루미늄 시트입니다.. 일부 사용 시나리오에서는 서로를 대체할 수 있습니다., 그러나 화학 성분의 편차가 큽니다., 기계적 성질과 가격. 그러므로, you need to understand your usage scenarios before ordering aluminum sheets. And the difference between 3003 알루미늄 시트 및 1060 알루미늄 시트.

3003 알루미늄 시트 소개

3003 알루미늄 시트 is one of the most common alloy aluminum sheets. 대표상품 입니다. 3000 시리즈 (Al-Mn) 알루미늄 판. It is a widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum).

열처리로는 강화할 수 없습니다., so cold working methods are used to improve its mechanical properties: it has high plasticity in the annealed state, 반냉간 가공 경화 중 우수한 가소성, 냉간 가공 경화 중 낮은 소성, 좋은 내식성, 좋은 용접성, and can be cut. Poor performance.

3003 알루미늄 시트 포장

It is mainly used for low-load parts that require high plasticity and good weldability and work in liquid or gas media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.

화학적 구성 요소

In terms of chemical composition, the main elements of 3003 aluminum plate include aluminum (알) 그리고 망간 (망간), of which the aluminum content is greater than 98% and the manganese content is between 1-1.5%. 3003 aluminum sheet also contains a small amount of copper (Cu) and other impurity elements. The content and proportion of these alloy elements play an important role in the hardness, 힘, corrosion resistance and other properties of 3003 알루미늄 판.

Mechanical standards

Mechanical standards are an important indicator for measuring material performance and an important basis for evaluating the quality of 3003 알루미늄 시트. In terms of mechanical standards, the hardness, 힘, ductility and corrosion resistance of 3003 aluminum plates are all key indicators.

경도 3003 aluminum sheet is mainly reflected in its tensile strength and yield strength. 국제 표준에 따르면, the tensile strength of 3003 aluminum sheet is between 110-205MPa and the yield strength is between 40-150MPa. This shows that 3003 aluminum plate has a certain hardness and strength to a certain extent and can meet the needs of different fields.

The ductility of 3003 aluminum plate is also one of its important mechanical standards. The elongation rate of 3003 aluminum sheet is usually above 10%, which means that it has good sheet forming performance and is suitable for various stamping and forming processes.

내식성은 3003 aluminum sheet is also one of the important indicators in its mechanical standards. Because it contains manganese and other alloying elements, 3003 aluminum plates have good corrosion resistance and can be used in humid and corrosive environments for a long time without being damaged.

소개 1060 알루미늄 시트

1060 aluminum sheet and strip, 포함하는 99.6% 알류미늄, is also called pure aluminum plate. It is a commonly used series in the aluminum sheet and strip family. The advantages of this series of aluminum plates: the most commonly used series, the production process is relatively simple, the technology is relatively mature, and the price has a huge advantage compared to other high-end alloy aluminum plates. It has good elongation and tensile strength, 기존 처리 요구 사항을 완전히 충족할 수 있습니다. (스탬핑, 스트레칭) 그리고 높은 성형성.

1060 알루미늄 시트 is industrial pure aluminum with high plasticity, 내식성, 전기 전도도 및 열전도율, 그러나 낮은 강도, 열처리로 강화할 수 없음, 그리고 가공성이 나쁘다; it can be gas welded, hydrogen atom welded and contact welded, but is not easy to braze; Easy to withstand various pressure processing, stretching and bending.

3003 알루미늄 시트 대 1060 알루미늄 시트

1060 aluminum plate is widely used in products that do not require high strength. Products are commonly used in signboards, 빌보드, building exterior decorations, bus bodies, high-rise building and factory wall decorations, kitchen sinks, lamp holders, fan blades, 전자 부품, chemical instruments, 박판 가공 부품, deep drawing or spinning concave parts. Shaped utensils, welded parts, 열교환기, clock surfaces and disks, 명판, 주방용품, 장식물, 반사 장비, 등.

3003 알루미늄 시트 대 1060 알루미늄 시트

Alloy differences

Differences in mechanical properties

Differences in use

부터 1060 aluminum plate has good electrical conductivity, it is usually used in electronic devices, 배터리, capacitors and other fields. Due to its higher strength and corrosion resistance, 3003 aluminum sheet is suitable for manufacturing body panels, 연료 탱크, ships and other fields with high strength requirements.

1060 알루미늄 시트 적용

• 전자 제품: used to manufacture electronic components, 전기 케이싱, LED heat sinks, 등., taking advantage of its good electrical and thermal conductivity properties.
• 건축자재: used to make decorative panels, 커튼월, 루핑 재료, 등., with good corrosion resistance and aesthetics.
• Advertising signs: used to make signs and billboards, thanks to its good formability and surface treatment capabilities.
• 가전 ​​제품: such as kitchen sinks, 갓, fan blades, 등., taking advantage of their ease of processing and corrosion resistance.
• Chemical equipment: used to make certain parts of chemical equipment to take advantage of its chemical stability.

의 응용 1060 알루미늄 시트

3003 aluminum plate application

• Chemical equipment and containers: In the pharmaceutical and food industries, 3003 aluminum plates are used to make containers and packaging materials. Because they will not react with chemical substances, they ensure the safety and quality of the products.
• 항공 우주: Leveraging its lightweight, corrosion-resistant and ability to withstand extreme conditions, 3003 aluminum sheets are used to manufacture aerospace components and equipment, helping to improve aircraft performance and fuel efficiency.
• 자동차 제조: In vehicles such as cars, 기차, 트램, 등., 3003 aluminum sheets are used as body panels, compartment panels, roof panels, 등. to reduce weight and improve fuel economy.
• 전자 분야: used in electronic product casings, 라디에이터, 등., using its conductive properties and heat dissipation capabilities to protect electronic components.
• 건축자재: Used for building exterior siding, roof panels, 천장, 등., both as decorative materials and to take advantage of its light weight and weather resistance.
• 운송: Not limited to cars, but also body parts for trains, 트램, 등. to achieve lightweight design.