3003 aluminyo sheet vs 1060 aluminyo sheet
110,912 Mga Pananaw 2025-01-21 09:49:37
3003 aluminyo sheet at 1060 aluminyo sheet ay parehong karaniwang mga sheet ng aluminyo. Maaari silang palitan ang bawat isa sa ilang mga sitwasyon ng paggamit, ngunit mayroon silang malaking deviations sa kemikal komposisyon, mekanikal na mga katangian at presyo. Kaya nga, you need to understand your usage scenarios before ordering aluminum sheets. And the difference between 3003 aluminyo sheet at 1060 aluminyo sheet.
3003 pagpapakilala ng aluminyo sheet
3003 aluminyo sheet is one of the most common alloy aluminum sheets. Ito ay isang kinatawan na produkto ng 3000 serye ng mga (Al Mn) plato ng aluminyo. It is a widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum).
Hindi ito mapapalakas ng heat treatment, so cold working methods are used to improve its mechanical properties: it has high plasticity in the annealed state, magandang plasticity sa panahon ng semi malamig na trabaho hardening, mababang plasticity sa panahon ng malamig na trabaho hardening, magandang paglaban sa kaagnasan, magandang weldability, and can be cut. Poor performance.
3003 naka package ang aluminum sheet
It is mainly used for low-load parts that require high plasticity and good weldability and work in liquid or gas media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.
Komposisyon ng kemikal
In terms of chemical composition, the main elements of 3003 aluminum plate include aluminum (Al) at mangganeso (Mn), of which the aluminum content is greater than 98% and the manganese content is between 1-1.5%. 3003 aluminum sheet also contains a small amount of copper (Cu) and other impurity elements. The content and proportion of these alloy elements play an important role in the hardness, lakas ng loob, corrosion resistance and other properties of 3003 mga plato ng aluminyo.
Mechanical standards
Mechanical standards are an important indicator for measuring material performance and an important basis for evaluating the quality of 3003 mga sheet ng aluminyo. In terms of mechanical standards, the hardness, lakas ng loob, ductility and corrosion resistance of 3003 aluminum plates are all key indicators.
Ang tigas ng 3003 aluminum sheet is mainly reflected in its tensile strength and yield strength. Ayon sa mga internasyonal na pamantayan, the tensile strength of 3003 aluminum sheet is between 110-205MPa and the yield strength is between 40-150MPa. This shows that 3003 aluminum plate has a certain hardness and strength to a certain extent and can meet the needs of different fields.
The ductility of 3003 aluminum plate is also one of its important mechanical standards. The elongation rate of 3003 aluminum sheet is usually above 10%, which means that it has good sheet forming performance and is suitable for various stamping and forming processes.
Ang paglaban ng kaagnasan ng 3003 aluminum sheet is also one of the important indicators in its mechanical standards. Because it contains manganese and other alloying elements, 3003 aluminum plates have good corrosion resistance and can be used in humid and corrosive environments for a long time without being damaged.
Panimula sa 1060 aluminyo sheet
1060 aluminum sheet and strip, na naglalaman ng 99.6% aluminyo, is also called pure aluminum plate. It is a commonly used series in the aluminum sheet and strip family. The advantages of this series of aluminum plates: the most commonly used series, the production process is relatively simple, the technology is relatively mature, and the price has a huge advantage compared to other high-end alloy aluminum plates. It has good elongation and tensile strength, at maaaring ganap na matugunan ang maginoo na mga kinakailangan sa pagproseso (pag stamp ng, pag-unat) at mataas na formability.
1060 aluminyo sheet is industrial pure aluminum with high plasticity, paglaban sa kaagnasan, electrical kondaktibiti at thermal kondaktibiti, pero mababa ang lakas, hindi maaaring palakasin ng paggamot sa init, at mahina ang machinability; it can be gas welded, hydrogen atom welded and contact welded, but is not easy to braze; Easy to withstand various pressure processing, stretching and bending.
3003 aluminyo sheet vs 1060 aluminyo sheet
1060 aluminum plate is widely used in products that do not require high strength. Products are commonly used in signboards, mga billboard, building exterior decorations, bus bodies, high-rise building and factory wall decorations, kitchen sinks, lamp holders, fan blades, mga electronic na bahagi, chemical instruments, manipis na plate processing bahagi, deep drawing or spinning concave parts. Shaped utensils, welded parts, mga heat exchanger, clock surfaces and disks, mga nameplate, mga gamit sa kusina, mga dekorasyon, reflective na kagamitan, atbp.
3003 aluminyo sheet vs 1060 aluminyo sheet
Alloy differences
| Al(%) | Si Si (%) | Cu (%) | Mg(%) | Zn (%) | Mn(%) | Ti(%) | V (%) | Fe(%) |
| 99.60 | 0.25 | 0.05 | 0.03 | 0.05 | 0.03 | 0.03 | 0.05 | 0.35 |
| 96.8-99.0 | 0.60 | 0.05-0.20 | 0-0.05 | 0.10 | 1.00-1.50 | – | – | 0.70 |
Differences in mechanical properties
| haluang metal | Lakas ng paghatak | Yield Lakas |
| 1060 | 110-136 | ≥35 |
| 3003 | 120-160 | ≥85 |
Differences in use
Dahil 1060 aluminum plate has good electrical conductivity, it is usually used in electronic devices, mga baterya, capacitors and other fields. Due to its higher strength and corrosion resistance, 3003 aluminum sheet is suitable for manufacturing body panels, mga tangke ng gasolina, ships and other fields with high strength requirements.
1060 application ng aluminyo sheet
- Mga produktong elektroniko: used to manufacture electronic components, mga casings ng kuryente, LED heat sinks, atbp., taking advantage of its good electrical and thermal conductivity properties.
- Mga materyales sa gusali: used to make decorative panels, mga pader ng kurtina, mga materyales sa bubong, atbp., with good corrosion resistance and aesthetics.
- Advertising signs: used to make signs and billboards, thanks to its good formability and surface treatment capabilities.
- Household appliances: such as kitchen sinks, mga lampshade, fan blades, atbp., taking advantage of their ease of processing and corrosion resistance.
- Kagamitan sa kemikal: used to make certain parts of chemical equipment to take advantage of its chemical stability.
Mga aplikasyon ng 1060 aluminyo sheet
3003 aluminum plate application
- Chemical equipment and containers: In the pharmaceutical and food industries, 3003 aluminum plates are used to make containers and packaging materials. Because they will not react with chemical substances, they ensure the safety and quality of the products.
- Aerospace: Leveraging its lightweight, corrosion-resistant and ability to withstand extreme conditions, 3003 aluminum sheets are used to manufacture aerospace components and equipment, helping to improve aircraft performance and fuel efficiency.
- Paggawa ng sasakyan: In vehicles such as cars, mga tren, mga tram, atbp., 3003 aluminum sheets are used as body panels, compartment panels, roof panels, atbp. to reduce weight and improve fuel economy.
- Electronic field: used in electronic product casings, mga radiator, atbp., using its conductive properties and heat dissipation capabilities to protect electronic components.
- Mga materyales sa gusali: Used for building exterior siding, roof panels, mga kisame, atbp., both as decorative materials and to take advantage of its light weight and weather resistance.
- Transportasyon: Not limited to cars, but also body parts for trains, mga tram, atbp. to achieve lightweight design.
